Bizerba Mobile Equipment Stand – Model SLICER-TABLE-275
27.9″ W × 32.25″ D × 27.75″ H | 600 lb load rating | NSF CertifiedPurpose-built for Bizerba GSP and VS12 slicers, this heavy-duty mobile stand turns your slicer into an ergonomic, self-contained workstation while keeping your kitchen floor clear and compliant. 14-gauge stainless steel, welded construction and a low-center-of-gravity design deliver rock-solid stability—on the line, in the deli or in K-12 kitchens.
Key benefits
- All-stainless, fully welded frame with 14-gauge 304 SS top resists corrosion and cleans in seconds.
- ¼″ coved-upward edge on every side keeps liquids and product off the floor.
- Four factory-drilled bolt holes let you secure your Bizerba slicer in minutes—no field layout required.
- Side lift arm quickly tilts the stand onto hidden swivel casters for easy relocation, then locks back onto high-friction foot pads for operation.
- Parking brake eliminates fore/aft or side movement during slicing.
- Combination front handle doubles as a remote sharpener holder for fast access.
- Five tray slides hold 18″ × 26″ sheet pans (2 ⅜″ fixed spacing) for convenient staging and scrap collection.
- Creased stainless bottom shelf with 3″ center drain speeds wash-down and drying.
- Low center of gravity and 5″ diameter high-grip feet enhance seismic stability.
- NSF/ANSI 2 & 169 listed and proudly made in Cleveland, Ohio, USA.
Compatible slicers
- GSP H i
- GSP H
- GSP HD i
- GSP HD
- VS12 F
- VS12 D-V-1
Technical specifications
| Model | SLICER-TABLE-275 |
|---|---|
| Overall dimensions (W × D × H) | 27.9″ × 32.25″ × 27.75″ |
| Working height with 4″ leg-set slicer* | Approx. 31.5″ |
| Load capacity | 600 lb on casters Up to 800 lb on leveling feet |
| Pan storage | 5 × 18″ × 26″ sheet pans 2.375″ center spacing |
| Material | 304 stainless steel, 14-ga top, fully welded |
| Mobility | Retractable swivel casters, side lift arm, parking brake |
| Edge profile | ¼″ coved-upward on all sides |
| Mounting provision | 4 pre-drilled slicer bolt holes |
| Bottom shelf | Fixed, creased, 3″ center drain |
| Scrap trough | 18″ W × 26″ D (standard) |
| Foot print stability | 4 high-friction pads, 5″ diameter |
| Net weight | 126 lb |
| Origin | Made in USA |
| Certifications | NSF/ANSI 2 & 169 |
*Requires optional 4″ Leg-Set Kit (GSP 4H-LEGSET) when installing GSP-series slicers.
Warranty
Bizerba backs the SLICER-TABLE-275 with a two-year, on-site parts and labor warranty for total peace of mind.
Important: Slicer, sheet pans, sharpener kaddy and leg-set kits are shown for illustration only and
are sold separately.
$3,562.02
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Mobile Bizerba stainless steel slicer stand, 600 lb capacity, NSF, retractable casters, built-in drain, pan storage, fits multiple GSP/VS slicers.
Manufacturer
Bizerba
Certifications
NSF, Made in USA
Height
27.75in
Width
27.75in
Depth
32.25in
Shipping Weight
160.0lbs
Top Construction
stainless steel top
Width (side - side)
24" - 29" wide
Utensil tree
without utensil tree
Base Type
undershelf
Depth (front - back)
32" deep
Height
27" high
Base Construction
stainless steel base
Specifications
Equipment Stand, mobile, 27.9"W x 32.25"D x 27.75”H, 600 lb. capacity, coved-upward edge on all four sides of table-top, 14-gauge stainless steel top, (4) predrilled mounting holes, combination handle/remote sharpener holder, (5) 18" x 26" pan capacity, 2.375" tray slide spacing, side lift arm for mobility or lock in place, (1) fixed stainless steel bottom shelf with 3" center drain, stainless steel welded construction, (4) high friction pad feet with retractable casters, NSF, Made in USA, fits slicers GSP H i, GSP H , GSP HD i, GSP HD, VS12 F, VS12 D-V-1
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.