Key specifications
- Amps
- 2.46 Amps
- Phase
- 1-Phase
- Dimensions
- 58.0"W × 34.0"D × 47.75"H
- Type
- School Milk Cooler
- Style
- Dual Access
- Installation Type
- Floor Model
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Beverage Air STF58HC-1-S is a dual-access school milk cooler with forced-air refrigeration, 24.3 cubic feet of capacity, and stainless steel construction inside and out.
- Holds 16 cases measuring 13 x 13 x 11 inches or 10 cases measuring 19 x 13 x 11 inches.
- Features full electronic control, automatic defrost, and an exterior digital thermometer.
- Includes self-latching doors and lids with safety bumpers, cylinder locks, epoxy-coated steel wire floor racks, and a floor drain.
- Uses R290 hydrocarbon refrigerant and connects to 115-volt power with a NEMA 5-15P plug and 8-foot cord.
Overall Dimensions:
58.0"W x 34.0"D x 47.75"HProduct Weight:
498.0 lbDual Access
Provides access from both sides through hinged doors and lids.
Forced-Air Refrigeration
Uses a balanced forced-air refrigeration system with R290 hydrocarbon refrigerant.
Stainless Steel Construction
The interior, exterior, lids, hinged doors, and door latches are stainless steel.
Case Capacity
Accommodates 16 cases measuring 13 x 13 x 11 inches or 10 cases measuring 19 x 13 x 11 inches.
Electronic Control and Defrost
Includes full electronic control and automatic defrost.
Self-Latching Access
Doors and lids include self-latching hardware and safety bumpers.
Security and Temperature Monitoring
Includes cylinder locks and an exterior digital thermometer.
Floor Racks and Drain
Includes epoxy-coated steel wire floor racks and a centrally located floor drain.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.