Key specifications
- BTU
- 1,851 BTU/hr
- Amps
- 2.46 Amps
- Phase
- 1-Phase
- Dimensions
- 49.0"W × 34.0"D × 47.75"H
- Type
- School Milk Cooler
- Style
- Dual Access
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Beverage-Air STF49HC-1-S is a dual-access school milk cooler with forced-air refrigeration and 20.55 cu. ft. of net capacity.
Its stainless steel interior and exterior include self-latching lids and doors with safety bumpers, an exterior digital thermometer, cylinder locks, and epoxy-coated steel wire floor racks.
- Case capacity for 12 cases measuring 13 x 13 x 11 in or 8 cases measuring 19 x 13 x 11 in.
- Electronic control and automatic defrost.
- R290 hydrocarbon refrigerant with a stated product temperature range of 36°F-40°F.
- Centrally located floor drain for cleaning and drain hose connection.
- Five-inch heavy-duty plate casters, including two locking casters.
The unit is specified for 115 Volts, 2.46 Amps, 60 Hz, single-phase operation with an 8 ft NEMA 5-15P cord.
Overall Dimensions:
49.0"W x 34.0"D x 47.75"HProduct Weight:
315.0 lbDual access
Provides access from both sides through self-latching lids and doors with safety bumpers.
Forced-air refrigeration
Uses a forced-air refrigeration system with R290 hydrocarbon refrigerant.
Temperature control
Electronic control and automatic defrost support a stated product temperature range of 36°F-40°F.
Stainless steel construction
The interior and exterior are stainless steel.
Storage and cleaning features
Epoxy-coated steel wire floor racks and a centrally located floor drain are included.
Temperature monitoring
An exterior digital thermometer is provided.
Security
Cylinder locks are included.
Mobility
Five-inch heavy-duty plate casters are included; two casters have locks.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.