Key specifications
- BTU
- 2,149 BTU/hr
- Amps
- 3.7 Amps
- Phase
- 1-Phase
- Dimensions
- 58.0"W × 31.25"D × 41.13"H
- Type
- School Milk Cooler
- Style
- Dual Access
Spec sheet
Beverage Air ST58HC-W Dual Access School Milk Cooler, Cold Wall, 22.5 Cu. Ft., White
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Beverage Air ST58HC-W is a dual-access, cold-wall school milk cooler with 22.5 cu. ft. of capacity, a white coated steel exterior, and a galvanized interior with a stainless steel floor.
- Holds 16 cases measuring 13 x 13 x 11 in or 10 cases measuring 19 x 13 x 11 in.
- Features self-latching doors and lids with safety bumpers, cylinder locks, and side lift doors.
- Includes epoxy-coated steel wire floor racks, a centrally located floor drain, and 4 in heavy-duty casters with two locking casters.
- Uses full electronic control, manual defrost, and R290 hydrocarbon refrigerant.
- Operates at 115 Volts with 3.7 Amps, a 60 Hz, 1-Phase electrical configuration, and a NEMA 5-15P plug with an 8 ft cord.
Cold-wall coolers are designed to hold product temperature during service; product should be moved to long-term refrigerated storage at the end of service.
Overall Dimensions:
58.0"W x 31.25"D x 41.13"HProduct Weight:
372.0 lbDual Access
Provides access from both sides through self-latching doors and lids with safety bumpers.
Cold Wall Cooling
Cold-wall refrigeration is designed to hold product temperature during service and is specified for a 36°F to 40°F temperature range.
Case Storage
Accommodates 16 cases measuring 13 x 13 x 11 in or 10 cases measuring 19 x 13 x 11 in.
Cabinet Construction
Has a white coated steel exterior, galvanized interior, and stainless steel floor.
Electronic Control
Uses full electronic control with manual defrost.
Floor Racks and Drain
Includes epoxy-coated steel wire floor racks and a centrally located floor drain for cleaning and drain-hose connection.
Security and Mobility
Includes cylinder locks, self-latching doors and lids, safety bumpers, and 4 in heavy-duty casters with two locking casters.
Refrigerant
Uses R290 hydrocarbon refrigerant.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.