Key specifications
- BTU
- 1,976 BTU
- Amps
- 3.7 Amps
- Phase
- 1-Phase
- Dimensions
- 49.0"W × 31.25"D × 41.13"H
- Type
- School Milk Cooler
- Style
- Dual Access
Spec sheet
Beverage Air ST49HC-S 49-Inch Dual-Access School Milk Cooler, Stainless Steel, 18.97 Cu. Ft., Cold Wall
- Stainless Steel
- White
- White Exterior and Stainless Steel Interior
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Beverage-Air ST49HC-S is a dual-access cold wall school milk cooler with 18.97 cu. ft. of net capacity and stainless steel interior and exterior construction.
- Maintains product temperature between 36°F and 40°F.
- Holds 12 cases measuring 13 x 13 x 11 inches or 8 cases measuring 19 x 13 x 11 inches.
- Includes self-latching doors and lids with safety bumpers, cylinder locks, epoxy-coated steel wire floor racks, electronic control, and manual defrost.
- Uses R290 hydrocarbon refrigerant and includes a centrally located floor drain and 4-inch casters, two with locks.
Overall Dimensions:
49.0"W x 31.25"D x 41.13"HProduct Weight:
336.0 lbDual Access
Provides access from both sides of the school milk cooler.
Cold Wall Refrigeration
Maintains product temperature between 36°F and 40°F; the cutsheet specifies moving product to long-term refrigerated storage after service.
Case Capacity
Accommodates 12 cases measuring 13 x 13 x 11 inches or 8 cases measuring 19 x 13 x 11 inches.
Stainless Steel Interior and Exterior
The cabinet, lids, hinged doors, and door latches are specified as stainless steel.
Self-Latching Doors and Lids
Safety bumpers support the self-latching doors and lids.
Electronic Control
Full electronic control is specified for the cooler.
Wire Floor Racks
Heavy-duty epoxy-coated steel wire floor racks are standard.
Casters and Floor Drain
Includes 4-inch heavy-duty plate casters, two with locks, and a centrally located floor drain.
Cylinder Locks
Cylinder locks are included.
Manual Defrost
Manual defrost is specified for the cooler.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.