Key specifications
- BTU
- 1,690 BTU/h
- Amps
- 3.7 Amps
- Phase
- 1-Phase
- Dimensions
- 34.0"W × 31.25"D × 41.13"H
- Type
- School Milk Cooler
- Style
- Dual Access
Spec sheet
Beverage Air ST34HC-W Dual-Access Cold Wall School Milk Cooler, 12.37 Cu. Ft., White Exterior, 34-Inch Width
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Beverage-Air ST34HC-W is a dual-access cold wall school milk cooler with a 12.37-cubic-foot capacity, white coated steel exterior, and galvanized interior with a stainless steel floor.
- Accommodates 8 cases measuring 13 x 13 x 11 inches or 4 cases measuring 19 x 13 x 11 inches.
- Maintains product temperature between 36°F and 40°F during service.
- Includes self-latching doors and lids with safety bumpers, cylinder locks, and epoxy-coated steel wire floor racks.
- Features full electronic control, manual defrost, an exterior thermometer, and a centrally located floor drain.
- Uses R290 Hydrocarbon refrigerant and operates on 115-volt, single-phase power.
Cold wall milk coolers are designed to hold product temperature during service. Product should be moved to long-term refrigerated storage at the end of service.
Overall Dimensions:
34.0"W x 31.25"D x 41.13"HProduct Weight:
270.0 lbDual Access
Provides access from both sides of the cooler.
Cold Wall Refrigeration
Designed to maintain product temperature between 36°F and 40°F during service.
Case Capacity
Holds 8 cases measuring 13 x 13 x 11 inches or 4 cases measuring 19 x 13 x 11 inches.
Electronic Control
Uses full electronic control for the cooling system.
Self-Latching Doors and Lids
Self-latching doors and lids include safety bumpers.
Secure Storage
Cylinder locks provide a locking feature for the doors and lids.
Wire Floor Racks
Includes heavy-duty epoxy-coated steel wire floor racks.
Cleaning Drain
A centrally located floor drain supports cleaning and drain-hose connection.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.