Beverage Air

Beverage-Air Three-Section Refrigerated Sandwich Prep Table with 6 Drawers, 72-Inch Standard Top

SKU: SPED72HC-10-6
$10,016.08
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air Three-Section Refrigerated Sandwich Prep Table with 6 Drawers, 72-Inch Standard Top

20.02 cu. ft., Self-Contained Rear-Mounted R290 Refrigeration, 10 1/6-Size Pan Capacity

Built for fast sandwich assembly, this 72-inch prep table combines six drawers, a 10-pan ingredient rail, and dependable self-contained R290 refrigeration.

  • Three-section, 72-inch sandwich prep table with 20.02 cu. ft. of refrigerated storage.
  • Six pull-out drawers provide organized ingredient access, and the upper and lower drawers fit 6-inch deep pans.
  • Stainless steel top opens for ten 1/6-size pans and includes a removable 10-inch white polyethylene cutting board.
  • Rear-mounted self-contained refrigeration uses R290 refrigerant, adaptive defrost, and electronic control.
  • Durable stainless steel exterior with an aluminum interior and 6-inch casters helps support everyday kitchen use.

Overall Dimensions:

72.0"W x 32.0"D x 45.13"H

Product Weight:

452.0 lb

Six Drawer Storage

Upper and lower pull-out drawers use telescoping slides with locking mechanisms and accommodate 6-inch deep pans.

Six Drawer Storage

Ten-Pan Top

Stainless steel top opens for ten 1/6-size pans; pans furnished are 4 inches deep.

Ten-Pan Top

Removable Cutting Board

10-inch-wide white polyethylene cutting board provides a durable prep surface and removes for cleaning.

Rear-Mounted Refrigeration

Self-contained R290 system includes adaptive defrost and an epoxy-coated evaporator coil.

Electronic Temperature Control

Full electronic control and enhanced airflow help keep open containers below 41°F and maintain 36°F to 38°F.

Durable Cabinet Construction

Stainless steel front, sides, top, drawers, and grille with galvanized back and bottom plus an aluminum interior liner.

Mobility and Service Access

6-inch casters with brakes on two casters, removable stainless steel hoods, and snap-in magnetic gaskets support everyday use and cleaning.

Type Sandwich Prep Table
Style Standard Top
Installation Type Floor Model
Compartments 3
Capacity 20.02 Cubic Feet
Pan Capacity 10
Pan Size 1/6 Size
Material Stainless Steel
Interior Finish Aluminum
Finish Stainless Steel
Controls Electronic
Temperature Range 36°F to 38°F
Refrigeration Type Self-Contained, Rear-Mounted
Refrigerant Type R290 Hydrocarbon
Horsepower 1/3 HP
BTU 1,549 BTU/Hr
Voltage 115 Volts
Amps 5.4 Amps
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Shipping Width 75 Inches
Shipping Depth 38 Inches
Shipping Height 48 Inches
Shipping Weight 452 Pounds
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Warranty & Protection

7-year parts, labor, and compressor warranty

Frequently Asked Questions

It has six drawers, and the upper and lower pull-out drawers accommodate 6-inch deep pans.
The top accommodates ten 1/6-size pans. The pans furnished are 4 inches deep, and the top will accommodate 6-inch deep pans.
It uses rear-mounted self-contained refrigeration with R290 hydrocarbon refrigerant and a 1/3 HP compressor.
The unit requires 115/60/1 power, draws 5.4 full load amps, uses a NEMA 5-15P plug, and includes an 8-foot cord.
Required clearance is 3 inches at the bottom and 2 inches at the rear.
Units shipped on or after July 1, 2024 are covered by a 7-year parts, labor, and compressor warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.