Beverage Air

Beverage Air SPED36HC-08C-2 One-Section Stainless Steel Sandwich Prep Table with Drawers, 36" Wide, 8-Pan Cut Top, 17" Cutting Board

SKU: SPED36HC-08C-2
$6,238.81
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage Air SPED36HC-08C-2 One-Section Stainless Steel Sandwich Prep Table with Drawers, 36" Wide, 8-Pan Cut Top, 17" Cutting Board

Rear-Mounted Self-Contained R290 Refrigeration, 115V, 1-Phase

Built for fast sandwich assembly, this refrigerated prep table keeps ingredients cold and organized while providing a durable stainless steel work surface and convenient drawer access.

  • One-section, 36-inch-wide sandwich prep table with two drawers and a 17-inch cutting board.
  • Holds eight 1/6-size pans; the top accommodates pans up to 6 inches deep.
  • Stainless steel exterior with a corrosion-resistant aluminum interior for durability and easy cleaning.
  • Rear-mounted, self-contained R290 refrigeration with electronic controls and adaptive defrost.
  • Enhanced airflow helps keep open containers below 41°F and maintain 36°F to 38°F temperatures.
  • Standard 6-inch casters with brakes make the unit easier to move and clean around.

Overall Dimensions:

36.0"W x 38.25"D x 45.0"H

Product Weight:

276.0 lb

Stainless Steel Cabinet Construction

Stainless steel front, sides, top, drawers, and grille are built for heavy-duty commercial use, with a galvanized steel back and bottom.

Stainless Steel Cabinet Construction

Corrosion-Resistant Aluminum Interior

The interior liner is aluminum for dependable performance and easier maintenance.

Corrosion-Resistant Aluminum Interior

17-Inch Removable Cutting Board

A 17-inch-wide white polyethylene cutting board comes standard and removes for cleaning.

Eight-Pan Cut Top

The top opening is designed for eight 1/6-size pans, and the furnished pans are 4 inches deep with top capacity for 6-inch-deep pans.

Dual Pull-Out Drawers

Upper and lower drawers accommodate 6-inch-deep pans and ride on telescoping slides with a locking mechanism to prevent accidental removal.

Positive Drawer Seal

Snap-in magnetic gaskets help create a tight drawer seal.

Self-Contained R290 Refrigeration

Rear-mounted refrigeration uses environmentally friendly R290 hydrocarbon refrigerant for efficient operation.

Electronic Temperature Management

Full electronic control with adaptive defrost helps maintain consistent holding temperatures.

Standard Mobility

6-inch casters with two brakes are standard for easier positioning and cleaning.

Type Sandwich Prep Table
Style Cut Top
Installation Type Floor Model
Capacity 10.01 Cubic Feet
Compartments 1
Drawers 2
Pan Capacity 8 1/6 Size Pans
Pan Size 1/6 Size
Material Stainless Steel
Interior Finish Aluminum
Finish Stainless Steel
Controls Electronic
Temperature Range 36°F to 38°F
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
Voltage 115 Volts
Amps 2.0 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
BTU 1,140 BTU/Hr
Horsepower 1/6 HP
Shipping Width 36 Inches
Shipping Depth 39 Inches
Shipping Height 45 Inches
Shipping Weight 276 Pounds
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Warranty & Protection

7-year parts and labor; 7-year compressor warranty.

Frequently Asked Questions

It holds eight 1/6-size pans, and the furnished pans are 4 inches deep.
Yes. The top will accommodate pans up to 6 inches deep.
Yes. The 17-inch-wide white polyethylene cutting board is removable for cleaning.
It uses a rear-mounted, self-contained refrigeration system with R290 hydrocarbon refrigerant.
It is wired for 115/60/1 power and includes a NEMA 5-15P plug with an 8-foot cord.
The documentation lists a 7-year parts and labor warranty and a 7-year compressor warranty for units shipped on or after July 1, 2024.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.