Beverage Air

Beverage-Air 72-Inch Three-Section Sandwich Prep Table Refrigerator with 10 1/6-Size Pan Top

SKU: SPE72HC-10
$5,817.47
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air 72-Inch Three-Section Sandwich Prep Table Refrigerator with 10 1/6-Size Pan Top

Standard Top, Rear-Mounted Self-Contained Refrigeration, 115V

Built for busy prep lines, this 72-inch refrigerated sandwich table pairs a spacious 10-pan top with durable stainless steel construction and reliable self-contained cooling.

  • 72-inch, three-section prep table with 20.02 cu. ft. of refrigerated storage.
  • Top opening holds ten 1/6-size pans and includes a 10-inch cutting board.
  • Stainless steel exterior top, front, sides, and doors with galvanized back/bottom and aluminum interior.
  • Rear-mounted self-contained refrigeration uses R290 refrigerant and a 1/3 HP compressor.
  • Self-closing doors, 6 shelves, magnetic gaskets, and removable components help streamline cleaning and service.
  • Factory-wired for 115V/60Hz operation with a NEMA 5-15P plug and 8-foot cord.

Overall Dimensions:

72.0"W x 32.0"D x 45.0"H

Product Weight:

432.0 lb

10-Pan Sandwich Top

Stainless steel top opens for ten 1/6-size pans; the unit ships with ten 4-inch-deep polycarbonate pans and will accept 6-inch-deep pans.

10-Inch Cutting Board

Removable white polyethylene cutting board gives staff an easy prep surface and additional workspace.

Durable Cabinet Construction

Stainless steel front, sides, top, doors, and grille with galvanized steel back and bottom and an aluminum interior liner.

Self-Contained Refrigeration

Rear-mounted refrigeration system uses R290 refrigerant, adaptive defrost, and full electronic control to maintain product temperatures between 36°F and 38°F.

Convenient Door Design

Three self-closing doors feature a 120° stay-open design, field-reversible hinges, and easy removal for service and cleaning.

Storage Capacity

Includes six epoxy-coated steel wire shelves for organized refrigerated storage.

Service-Friendly Details

Removable stainless steel hoods and snap-in magnetic gaskets simplify cleaning and maintenance.

Mobile Base

Supplied with 6-inch casters and two brakes for easier positioning and service access.

Type Sandwich Prep Table
Style Standard Top
Installation Type Floor Model
Capacity 20.02 Cubic Feet
Material Stainless Steel
Interior Finish Aluminum
Refrigeration Type Self-Contained
Refrigerant Type R290
Pan Capacity 10 1/6-Size Pans
Pan Size 1/6 Size
Controls Electronic
Voltage 115 Volts
Amps 5.4 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Horsepower 1/3 HP
BTU 1,549 BTU/Hr
Shipping Width 74 Inches
Shipping Depth 38 Inches
Shipping Height 43 Inches
Shipping Weight 432 lb.
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Warranty & Protection

7-year parts, labor, and compressor warranty for units shipped on or after July 1, 2024.

Frequently Asked Questions

The top holds ten 1/6-size pans, and the unit ships with ten 4-inch-deep polycarbonate pans.
Yes, the top will accommodate 6-inch-deep pans.
It is factory-wired for 115/60/1 power, draws 5.4 full-load amps, uses a NEMA 5-15P plug, and includes an 8-foot cord.
It uses a rear-mounted self-contained refrigeration system with R290 refrigerant and adaptive defrost.
The cabinet is designed to maintain product temperatures between 36°F and 38°F.
The unit requires 3 inches of bottom clearance and 2 inches of rear clearance.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.