Key specifications
- BTU
- 1,434 BTU/h
- Amps
- 2.2 Amps
- Phase
- 1-Phase
- Dimensions
- 58.0"W × 30.63"D × 41.13"H
- Type
- School Milk Cooler
- Style
- Single Access
Spec sheet
Beverage Air SM58HC-W 58-Inch Single-Access Cold Wall School Milk Cooler, 22.63 Cu. Ft., White
- White
- Stainless steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Beverage Air SM58HC-W is a single-access, cold wall school milk cooler with 22.63 cu. ft. of net capacity and a white coated steel exterior.
It uses electronic control to maintain product temperature between 36°F and 40°F during service. The cooler has a galvanized steel interior with a stainless steel floor, manual defrost, R290 hydrocarbon refrigerant, and a 1/3 HP refrigeration system.
- Holds 16 cases measuring 13 x 13 x 11 in. or 10 cases measuring 19 x 13 x 11 in.
- Self-latching doors or lids with safety bumpers and a cylinder lock
- Epoxy-coated steel wire floor racks and a centrally located floor drain
- Four 4 in. plate casters, including two locking casters
- 115 Volt, 60 Hz, single-phase connection with a NEMA 5-15P plug and 8 ft. cord
Cold wall milk coolers are designed to hold product temperature during service; product should be moved to long-term refrigerated storage after service.
Overall Dimensions:
58.0"W x 30.63"D x 41.13"HProduct Weight:
376.0 lbSingle-Access Cold Wall Design
Designed to hold product temperature during service, with product moved to long-term refrigerated storage after service.
Electronic Temperature Control
Full electronic control maintains product temperature between 36°F and 40°F.
Case Capacity
Accommodates 16 cases measuring 13 x 13 x 11 in. or 10 cases measuring 19 x 13 x 11 in.
Interior Construction
Galvanized steel interior with a stainless steel floor and stainless steel lids.
Self-Latching Access
Self-latching doors or lids include safety bumpers, and a cylinder lock provides added security.
Floor Racks and Drain
Epoxy-coated steel wire floor racks are standard, with a centrally located floor drain for cleaning.
Caster Base
Includes four 4 in. heavy-duty plate casters, with two casters equipped with locks.
Manual Defrost
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.