Beverage Air

Beverage-Air SM58HC-S Single Access Cold Wall School Milk Cooler, 58 in. Wide, Stainless Steel, 22.63 Cu. Ft.

SKU: SM58HC-S
$5,189.86
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air SM58HC-S Single Access Cold Wall School Milk Cooler, 58 in. Wide, Stainless Steel, 22.63 Cu. Ft.

Holds 16 small milk cases or 10 larger cases; 115V, R290 refrigerant, and locking casters.

Built for repeated cafeteria service, this milk cooler keeps milk cartons cold, secures contents with locking hardware, and cleans up quickly with stainless steel construction and a central floor drain.

  • 22.63 cu. ft. capacity holds up to 16 cases sized 13" x 13" x 11" or 10 cases sized 19" x 13" x 11".
  • Single-access, cold wall design is made for repeated serving during busy meal periods.
  • Stainless steel interior and exterior provide durability and easy cleanup.
  • Electronic control, manual defrost, and an exterior thermometer support straightforward operation.
  • Self-latching lids/door, safety bumpers, and a cylinder lock help protect product.
  • Wire floor racks, a central floor drain, and 4" locking casters add convenience and mobility.
  • R290 hydrocarbon refrigerant and a 1/3 HP compressor support efficient cooling.

Overall Dimensions:

58.0"W x 30.63"D x 41.13"H

Product Weight:

384.0 lb

Stainless Steel Construction

Stainless steel interior and exterior help resist wear and make cleanup easier.

Stainless Steel Construction

Single Access Design

One access point supports fast loading and serving in cafeteria settings.

Cold Wall Cooling

Designed to hold product temperature during service and repeated access.

Electronic Control

Full electronic control provides simple operation and temperature management.

Manual Defrost

Manual defrost keeps routine maintenance straightforward.

Central Floor Drain

A centrally located floor drain simplifies cleaning and hose connection.

Secure Closure System

Self-latching lids/door, safety bumpers, and a cylinder lock add protection and safety.

Wire Floor Racks

Heavy-duty epoxy-coated steel wire floor racks are standard for product support.

Locking Casters

4" heavy-duty plate casters, with 2 locking, make repositioning easier.

R290 Refrigerant

Uses environmentally friendly R290 hydrocarbon refrigerant.

Foamed-In-Place Insulation

CFC- and HCFC-free foamed-in-place insulation adds strength and energy efficiency.

Exterior Thermometer

An exterior thermometer lets staff check conditions at a glance.

Type School Milk Cooler
Access Type Single Access
Installation Type Freestanding
Capacity 22.63 Cubic Feet
Material Stainless Steel
Interior Finish Stainless Steel
Finish Stainless Steel
Refrigeration Type Cold Wall
Refrigerant Type R290 Hydrocarbon
Controls Electronic
Temperature Range 36°F to 40°F
Voltage 115 Volts
Amps 2.2 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Horsepower 1/3 HP
BTU 1,434 BTU/Hr
Shipping Width 58 Inches
Shipping Depth 31 Inches
Shipping Height 42 Inches
Shipping Weight 384 lb.
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Warranty & Protection

7-year parts, labor, and compressor warranty.

Frequently Asked Questions

It has 22.63 cu. ft. of capacity and can hold up to 16 cases sized 13" x 13" x 11" or 10 cases sized 19" x 13" x 11".
The refrigeration system is designed to hold product between 36°F and 40°F during service.
It runs on 115/60/1 power, draws 2.2 full load amps, and comes with a NEMA 5-15P plug and an 8' cord.
It includes a centrally located floor drain, manual defrost, and heavy-duty epoxy-coated wire floor racks.
Yes. It comes standard with 4" heavy-duty plate casters, including 2 casters with locks.
The current warranty update states 7-year coverage on parts, labor, and compressors for units shipped on or after July 1, 2024.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.