Key specifications
- BTU
- 1,367 BTU/Hour
- Amps
- 2.2 Amps
- Phase
- 1-Phase
- Dimensions
- 49.0"W × 30.63"D × 41.13"H
- Type
- School Milk Cooler
- Installation Type
- Floor Model
Spec sheet
Beverage Air SM49HC-W-02 School Milk Cooler, 20.32 Cu. Ft., Single Access Cold Wall, White Exterior, Stainless Steel Interior
- Stainless Steel
- White Exterior and Stainless Steel Interior
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
School milk storage: The Beverage-Air SM49HC-W-02 is a 20.32 cubic foot single-access, cold wall cooler with a white coated steel exterior and stainless steel interior.
It is designed to hold product temperature between 36°F and 40°F during service and includes full electronic control, manual defrost, self-latching doors or lids with safety bumpers, and a cylinder lock.
- Accommodates 12 cases measuring 13 x 13 x 11 inches or 8 cases measuring 19 x 13 x 11 inches.
- Includes epoxy-coated steel wire floor racks and a centrally located floor drain.
- Uses R290 hydrocarbon refrigerant and operates on 115 volts with a NEMA 5-15P plug.
Overall Dimensions:
49.0"W x 30.63"D x 41.13"HProduct Weight:
339.0 lbCold Wall Refrigeration
Designed to hold product temperature between 36°F and 40°F during service.
Single Access
Single-access configuration for school milk storage.
Case Capacity
Accommodates 12 cases measuring 13 x 13 x 11 inches or 8 cases measuring 19 x 13 x 11 inches.
Cabinet Construction
White coated steel exterior, stainless steel interior, and stainless steel lids, hinged door, and door latches.
Electronic Control
Full electronic control with manual defrost.
Storage and Drainage
Includes heavy-duty epoxy-coated steel wire floor racks and a centrally located floor drain for cleaning and drain hose connection.
Security and Door Protection
Self-latching doors or lids with safety bumpers and a cylinder lock.
Mobility
Four-inch heavy-duty plate casters, including two locking casters.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.