Key specifications
- BTU
- 1,224 BTU/Hr
- Amps
- 2.2 Amps
- Phase
- 1-Phase
- Dimensions
- 34.0"W × 30.63"D × 41.13"H
- Type
- School Milk Cooler
- Style
- Single Access
Spec sheet
Beverage Air SM34HC-S 34-Inch Single-Access Cold Wall School Milk Cooler, Stainless Steel, 12.73 Cu. Ft.
- Stainless Steel
- White Exterior and Stainless Steel Interior
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Beverage Air SM34HC-S is a single-access, cold-wall school milk cooler with a stainless steel interior and exterior. Its 12.73 cubic foot interior accommodates up to eight 13 x 13 x 11 inch cases or four 19 x 13 x 11 inch cases.
The cooler uses R290 refrigerant and electronic control to maintain product temperature between 36°F and 40°F during service. Manual defrost, epoxy-coated steel wire floor racks, a floor drain, cylinder lock, and self-latching doors and lids with safety bumpers support daily operation.
- Dimensions: 34 inches wide x 30.63 inches deep x 41.13 inches high with casters
- Electrical: 115 Volts, 2.2 Amps, 60 Hz, single phase, with an 8 foot cord and NEMA 5-15P plug
- Refrigeration: Cold wall system using R290 hydrocarbon refrigerant
Overall Dimensions:
34.0"W x 30.63"D x 41.13"HProduct Weight:
252.0 lbCold Wall Refrigeration
Uses R290 hydrocarbon refrigerant and maintains product temperature between 36°F and 40°F during service.
Single Access
Configured with a single-access lift-door design for school milk storage.
Stainless Steel Construction
Stainless steel interior and exterior, including the lids and hinged door.
Electronic Control
Full electronic control manages the refrigeration system.
Self-Latching Doors and Lids
Self-latching doors and lids include safety bumpers and flexible compression gaskets.
Floor Racks and Drain
Includes epoxy-coated steel wire floor racks and a centrally located floor drain for cleaning and drain-hose connection.
Cylinder Lock
Provides lockable access to the cooler.
Heavy-Duty Casters
Includes four 4-inch heavy-duty plate casters, with two casters equipped with locks.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.