Beverage Air

Beverage-Air 72-Inch Shallow-Depth Draft Beer Cooler with 3 Solid Doors and Dual Faucet Towers

SKU: DDN72HC-S
$6,538.11
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air 72-Inch Shallow-Depth Draft Beer Cooler with 3 Solid Doors and Dual Faucet Towers

3-Keg Capacity, Stainless Steel Exterior, Self-Contained R290 Refrigeration

Built for busy bars, this shallow-depth beer cooler combines three-keg storage, dual-faucet dispensing, and stainless steel durability in one service-ready cabinet.

  • Stores up to 3 half-barrel kegs in a 72-inch wide cabinet
  • Two dual-faucet towers provide four draft dispensing points
  • Stainless steel exterior, top, drip tray, and reinforced floor
  • Self-contained R290 refrigeration helps maintain 36°F to 38°F
  • Self-closing, lockable doors with magnetic gaskets
  • Rear drain hose simplifies floor-drain connection
  • 115V operation with a standard NEMA 5-15P plug

Overall Dimensions:

72.0"W x 26.38"D x 49.31"H

Product Weight:

382.79 lb

Three-Door Beer Dispenser Cabinet

Three solid doors provide organized access to the keg storage compartment and help keep service areas efficient.

Three-Door Beer Dispenser Cabinet

Dual Faucet Towers

Two dual-angle faucet columns support multiple draft service points from a single cabinet.

Dual Faucet Towers

Stainless Steel Exterior and Top

Heavy-duty stainless steel exterior surfaces, top, and drip tray are built for commercial bar use.

Galvanized Interior with Stainless Steel Floor

Galvanized steel walls and ceiling pair with a reinforced stainless steel floor for durability.

Self-Contained R290 Refrigeration

Built-in refrigeration uses environmentally friendly R290 hydrocarbon refrigerant.

Full Electronic Control

Electronic controls help manage cabinet performance and maintain serving temperatures between 36°F and 38°F.

Self-Closing Locking Doors

Doors include locks, magnetic gaskets, and a 120° stay-open feature for convenience during service.

3-In-1 Draft Solution

Can dispense beer, wine, or coffee with the same tap without line or manifold changes.

Rear Drain Connection

A rear-mounted drain hose on the compressor side helps connect the unit to a floor drain.

Type Direct Draw Dispenser
Style Shallow Depth
Installation Type Floor Model
Capacity 3 Half-Barrel Kegs
Top Style Flat Top
Material Stainless Steel
Interior Finish Galvanized Steel
Finish Stainless Steel
Controls Electronic
Temperature Range 36°F to 38°F
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
BTU 1,942 BTU/Hr
Voltage 115 Volts
Amps 3.3 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Shipping Width 74 3/4 Inches
Shipping Depth 36 1/2 Inches
Shipping Height 42 3/16 Inches
Shipping Weight 383 Pounds
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Warranty & Protection

7-year parts and labor warranty; 7-year compressor part warranty for units shipped after 07/01/2024.

Frequently Asked Questions

It is designed to hold 3 half-barrel kegs.
The unit operates on 115V, 60 Hz, single-phase power and draws 3.3 amps with a NEMA 5-15P plug.
It uses R290 hydrocarbon refrigerant in a self-contained refrigeration system.
Yes. The doors are self-closing and also include a 120° stay-open feature and door locks.
The cabinet maintains product temperatures between 36°F and 38°F.
Yes. The 3-in-1 draft solution can dispense beer, wine, or coffee with the same tap.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.