Beverage Air DDN72HC-B-12T 72-Inch Three-Door Direct Draw Beer Dispenser, 12-Tap Tower, 3 Half-Keg Capacity, Black Exterior
- BTU
- 1,942 BTU/Hr
- Amps
- 3.3 Amps
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 26.38"D × 49.88"H
- Type
- Direct Draw Beer Dispenser
- Style
- Shallow Depth
Specifications
Description
Beverage-Air 72-Inch Three-Door Direct Draw Beer Dispenser with 12-Tap Tower and 3 Half-Keg Capacity
Solid Doors, Black Exterior, Stainless Steel Top, Self-Contained R290 Refrigeration
Built for high-volume draft service, this 72-inch dispenser combines 12 taps, three half-keg storage bays, and efficient self-contained R290 refrigeration.
- 72-inch direct draw beer dispenser with three doors and storage for three half kegs.
- 12-tap insulated tower supports high-volume draft service.
- Self-contained R290 refrigeration helps maintain holding temperatures between 36°F and 38°F.
- Black painted steel exterior with stainless steel top, drip tray, and reinforced stainless steel floor.
- Self-closing doors include locks and magnetic gaskets to help preserve cold air.
- Pre-wired 115V operation with NEMA 5-15P plug and 8-foot cord simplifies installation.
Overall Dimensions:
72.0"W x 26.38"D x 49.88"HProduct Weight:
383.0 lb12-Tap Stainless Steel Tower
A 3-inch insulated dispensing tower provides 12 taps for high-volume draft service.
Three Half-Keg Capacity
Cabinet is designed to hold three 1/2 kegs across three door sections.
3-In-1 Draft Capability
Can dispense beer, wine, or coffee and other non-alcoholic beverages with the same tap setup, without line or manifold changes.
Self-Contained R290 Refrigeration
Energy-efficient hydrocarbon refrigeration with automatic non-electric defrost.
Electronic Temperature Control
Full electronic control helps maintain product temperatures between 36°F and 38°F.
Locking Self-Closing Doors
Doors feature locks, magnetic gaskets, and a 120° stay-open design for easier loading and service.
Heavy-Duty Cabinet Construction
Black painted steel exterior, stainless steel top and drip tray, galvanized steel walls and ceiling, and stainless steel floor.
Rear Drain Hose and Standard Compressor Location
Drain hose is located at the rear on the compressor side for floor drain connection; compressor is standard on the left side.
Documentation
Frequently Asked Questions
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.