Beverage Air

Beverage-Air DD94HC-S 94-Inch Direct Draw Draft Beer Cooler with 3 Solid Doors, 2 Dual-Faucet Towers, and 5 Half-Barrel Keg Capacity

SKU: DD94HC-S
$7,078.67
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air DD94HC-S 94-Inch Direct Draw Draft Beer Cooler with 3 Solid Doors, 2 Dual-Faucet Towers, and 5 Half-Barrel Keg Capacity

Stainless Steel Exterior, Self-Contained R290 Refrigeration, 115V

Built for high-volume draft service, this stainless steel floor model combines five half-barrel keg capacity, dual-faucet towers, and self-contained R290 refrigeration in one durable cabinet.

  • 94-inch direct draw cooler with 3 solid doors and capacity for 5 half-barrel kegs.
  • Two dual-faucet towers deliver four standard taps for fast, flexible service.
  • Stainless steel exterior, top, and drip tray are built for demanding commercial use.
  • Self-contained R290 refrigeration with electronic control maintains 36°F to 38°F.
  • Self-closing doors include locks, magnetic gaskets, and a 120° stay-open feature.
  • Rear drain hose and 8-foot cord simplify installation.

Overall Dimensions:

94.0"W x 30.37"D x 49.31"H

Product Weight:

494.0 lb

Three Solid Doors with Locks

Self-closing doors include locks, magnetic gaskets, and a 120° stay-open feature for daily service convenience.

Dual-Faucet Tower Setup

Two insulated towers with dual faucets provide four taps standard and support direct-draw dispensing.

Stainless Steel Exterior and Top

Heavy-duty stainless steel top with integrated drip tray and stainless steel exterior surfaces help resist wear and simplify cleaning.

Reinforced Interior Construction

Galvanized steel walls and ceiling pair with a heavy-duty stainless steel floor for durability in a wet, high-traffic environment.

Self-Contained R290 Refrigeration

Energy-efficient self-contained refrigeration uses R290 hydrocarbon refrigerant and automatic non-electric defrost.

Precise Electronic Control

Full electronic control helps maintain product temperatures between 36°F and 38°F.

3-In-1 Draft Solutions

The same tap can dispense beer, wine, or coffee without changing lines or manifolds.

Rear Drain Connection

A drain hose exits the rear on the compressor side for easy connection to a floor drain.

Type Draft Beer Cooler
Style Direct Draw Dispenser
Installation Type Floor Model
Capacity 32.768 Cubic Feet
Keg Capacity 5 Half-Barrel Kegs
Doors 3
Tap Towers 2
Faucets Per Tower 2
Material Stainless Steel
Interior Finish Galvanized Steel
Finish Stainless Steel
Controls Electronic
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
BTU 1,942 BTU/Hr
Horsepower 1/3 HP
Voltage 115 Volts
Amps 3.3 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Temperature Range 36°F to 38°F
Selling Unit Each
Units Per Case 1
Shipping Width 96 3/4 Inches
Shipping Depth 33 3/8 Inches
Shipping Height 42 3/16 Inches
Shipping Weight 494 lb.

Frequently Asked Questions

It holds up to 5 half-barrel kegs.
It requires 115V/60/1-phase power, draws 3.3 amps, and uses a NEMA 5-15P plug.
The unit is designed to maintain product temperatures between 36°F and 38°F.
Yes. It uses self-contained refrigeration with R290 hydrocarbon refrigerant and automatic non-electric defrost.
Yes. The 3-in-1 Draft Solutions setup can dispense beer, wine, or coffee without line or manifold changes.
Yes. The doors are self-closing, include locks, and have a 120° stay-open feature.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.