Beverage Air

Beverage-Air 72-Inch Direct Draw Beer Dispenser with 3 Doors, 3-Keg Capacity, and Dual Faucet Towers

SKU: DD72HC-S
$6,668.88
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air 72-Inch Direct Draw Beer Dispenser with 3 Doors, 3-Keg Capacity, and Dual Faucet Towers

Self-Contained R290 Refrigeration, Stainless Steel Exterior, 115V

Built for busy draft service, this 72-inch beer dispenser combines dual faucet towers, secure storage, and durable stainless steel construction with reliable self-contained R290 refrigeration.

  • Holds up to three 1/2-barrel kegs in a 72-inch, three-door cabinet.
  • Two dual-angle faucet columns provide flexible multi-tap draft service.
  • Stainless steel exterior, top, drip tray, and floor are built for heavy commercial use.
  • Self-contained R290 refrigeration with automatic defrost helps maintain serving temperatures between 36°F and 38°F.
  • Door locks, magnetic gaskets, and self-closing doors help protect product and reduce cold-air loss.

Overall Dimensions:

72.0"W x 30.37"D x 49.31"H

Product Weight:

372.0 lb

Dual Faucet Towers

Two dual-angle faucet columns provide an efficient multi-beer dispensing setup.

3-Door, 3-Keg Cabinet

Configured to store up to three half-barrel kegs in a 72-inch-wide footprint.

Stainless Steel Exterior And Top

Heavy-duty stainless steel construction on the exterior, top, and drip tray helps withstand demanding bar service.

Reinforced Interior Construction

Galvanized steel walls and ceiling with a reinforced stainless steel floor add strength where it matters most.

Self-Contained R290 Refrigeration

Built-in refrigeration uses R290 hydrocarbon refrigerant and automatic non-electric defrost for dependable operation.

Electronic Control System

Full electronic control supports consistent cabinet performance.

Door Locks And Magnetic Gaskets

Door locks and magnetic gaskets help secure product and maintain a tight seal.

Service-Friendly Design

Field-reversible doors and a bottom-front drain tube support easier installation and maintenance.

Type Direct Draw Beer Dispenser
Style Solid Door
Installation Type Floor Model
Capacity 23.643 Cubic Feet
Keg Capacity 3 Half-Barrel Kegs
Barrel Style 1/2 Barrel
Door Quantity 3
Tower Quantity 2
Faucet Quantity 2 Per Tower
Controls Electronic
Temperature Range 36°F to 38°F
Material Stainless Steel
Interior Finish Galvanized Steel
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
Horsepower 1/3 HP
Voltage 115 Volts
Amps 3.3 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Shipping Width 72 Inches
Shipping Depth 31 Inches
Shipping Height 50 Inches
Shipping Weight 372 lb.
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of UL Certified
UL Certified

Warranty & Protection

7-year parts, labor, and compressor warranty for units shipped on or after July 1, 2024.

Frequently Asked Questions

It is designed for 3 half-barrel kegs.
It uses self-contained refrigeration with R290 hydrocarbon refrigerant and automatic non-electric defrost.
The unit requires 115V / 60 Hz / 1-phase power, draws 3.3 amps, and uses a NEMA 5-15P plug.
Yes, door locks are included.
Yes, the doors are field reversible; the hinge kit is not included.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.