Beverage Air

Beverage-Air DD68HC-S 68-Inch Wide Direct Draw Beer Dispenser with Solid Doors and Dual Faucet Towers

SKU: DD68HC-S
$6,081.12
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air DD68HC-S 68-Inch Wide Direct Draw Beer Dispenser with Solid Doors and Dual Faucet Towers

3 Half-Barrel Keg Capacity, Self-Contained R290, 115V

Built for reliable draft service, this 68-inch dispenser keeps three half-barrel kegs cold and ready with dual towers, electronic controls, and efficient R290 refrigeration.

  • 68-inch direct draw beer dispenser with 2 solid doors and a dual-tower setup.
  • Holds 3 half-barrel kegs with 21.984 cubic feet of refrigerated capacity.
  • Stainless steel top and exterior with galvanized steel interior and reinforced stainless steel floor.
  • Self-contained R290 refrigeration maintains product temperatures between 36°F and 38°F.
  • Includes door locks, self-closing doors, 120° stay-open hinges, and magnetic gaskets.
  • 3-in-1 Draft Solutions can dispense beer, wine, coffee, or other non-alcoholic beverages without line or manifold changes.

Overall Dimensions:

68.0"W x 30.37"D x 49.31"H

Product Weight:

401.0 lb

Stainless Steel Exterior

Durable stainless steel construction is built for heavy-duty commercial use and easy cleaning.

Heavy-Duty Stainless Steel Top

Flat stainless steel top includes an integrated drip tray for convenient service.

Reinforced Interior Construction

Galvanized steel walls and ceiling pair with a heavy-duty stainless steel floor for added durability.

Dual Tower Dispense Setup

Includes two towers: one single-faucet tower and one dual-faucet tower for a total of three taps.

3-In-1 Draft Solution

Designed to serve beer, wine, coffee, or other non-alcoholic beverages from the same tap without line or manifold changes.

Full Electronic Control

Electronic controls support consistent operation and temperature management.

Secure Solid Doors

Self-closing doors include a 120° stay-open feature, magnetic gaskets, and door locks.

Self-Contained R290 Refrigeration

Uses environmentally friendly R290 refrigerant with automatic, non-electric defrost.

Temperature Holding Range

Maintains product temperatures between 36°F and 38°F.

Floor Drain Connection

Drain hose is located at the rear on the compressor side for connection to a floor drain.

Type Beer Dispenser
Style Direct Draw
Installation Type Floor Model
Capacity 21.984 Cubic Feet
Keg Capacity 3 Half-Barrel Kegs
Door Count 2
Tower Count 2
Faucet Count 3
Material Stainless Steel
Interior Finish Galvanized Steel
Finish Stainless Steel
Controls Electronic
Refrigeration Type Self-Contained
Refrigerant Type R290
Temperature Range 36°F to 38°F
Horsepower 1/3 HP
BTU 1,942 BTU/Hr
Voltage 115 Volts
Amps 3.3 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Drain Connection Required
Selling Unit Each
Units Per Case 1
Shipping Width 74 3/4 Inches
Shipping Depth 36 1/2 Inches
Shipping Height 42 3/16 Inches
Shipping Weight 401 lb.

Frequently Asked Questions

This model holds 3 half-barrel kegs.
It can dispense beer, wine, coffee, or other non-alcoholic beverages.
The dispenser maintains product temperatures between 36°F and 38°F.
Yes. The unit includes a drain hose for connection to a floor drain.
It uses 115V / 60 Hz / 1-phase power with a NEMA 5-15P plug and an 8-foot cord.
Yes. The doors are lockable, self-closing, and include a 120° stay-open feature.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.