Beverage Air

Beverage-Air DD36HC-S 36-Inch Direct Draw Draft Beer Cooler with Solid Door, Dual-Faucet Tower, and 1/2 Keg Capacity

SKU: DD36HC-S
$5,807.34
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Beverage-Air DD36HC-S 36-Inch Direct Draw Draft Beer Cooler with Solid Door, Dual-Faucet Tower, and 1/2 Keg Capacity

Self-Contained R290 Refrigeration, Stainless Steel Exterior, Flat Top Design

Built for busy bars and restaurants, this 36-inch direct draw beer cooler combines secure storage, efficient R290 refrigeration, and a dual-faucet tower for reliable draft service.

  • Holds one 1/2 keg in a 10.162 cu. ft. cabinet.
  • Single tower with dual faucets supports efficient direct-draw dispensing.
  • Stainless steel exterior and top with a reinforced stainless steel floor.
  • Self-contained R290 refrigeration helps maintain temperatures between 36°F and 38°F.
  • Locking, self-closing solid door improves convenience and security.
  • Factory-wired 115V operation with NEMA 5-15P plug and 3-amp draw.

Overall Dimensions:

36.0"W x 30.37"D x 49.31"H

Product Weight:

232.0 lb

Stainless Steel Exterior and Top

Heavy-duty stainless steel exterior and top are built for commercial bar environments and easy cleaning.

Galvanized Steel Interior with Reinforced Stainless Steel Floor

Durable interior construction uses galvanized steel on the walls and ceiling with a heavy-duty stainless steel floor.

Single Tower with Dual Faucets

The cabinet includes one dispensing tower with dual faucets for direct-draw beer service.

Full Electronic Control

Electronic controls help manage cabinet operation and temperature performance.

Self-Contained R290 Refrigeration

Built-in refrigeration uses environmentally friendly R290 hydrocarbon refrigerant for a self-contained installation.

Automatic Non-Electric Defrost

Automatic defrost reduces maintenance and helps keep the system operating consistently.

Secure Door Design

Door locks, magnetic gaskets, and a self-closing door with a 120° stay-open feature add convenience and help seal in cold air.

Rear Drain Hose Connection

A rear-located drain hose on the compressor side provides a connection point for a floor drain.

Factory-Wired Electrical Connection

The unit ships pre-wired with an 8-foot cord and NEMA 5-15P plug for 115V service.

7-Year Warranty

Covered by a 7-year parts, labor, and compressor warranty on units shipped on or after July 1, 2024.

Type Draft Beer Cooler
Style Direct Draw Dispenser
Installation Type Floor Model
Capacity 10.162 Cubic Feet
Material Stainless Steel
Finish Stainless Steel
Interior Finish Galvanized Steel
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
Controls Electronic
Temperature Range 36°F to 38°F
Horsepower 1/4 HP
BTU 1,702 BTU/Hr
Voltage 115 Volts
Amps 3 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Shipping Width 38 3/4 Inches
Shipping Depth 33 3/8 Inches
Shipping Height 42 3/16 Inches
Shipping Weight 232 Pounds
Selling Unit Each
Units Per Case 1

Frequently Asked Questions

It is listed with one 1/2 keg capacity and a 10.162 cubic foot cabinet.
It operates on 115V, 60Hz, single-phase power at 3 amps and uses a NEMA 5-15P plug.
The unit uses self-contained R290 hydrocarbon refrigerant.
Yes, the cabinet includes door locks and a self-closing door with a 120° stay-open feature.
It is designed to maintain product temperatures between 36°F and 38°F.
Units shipped on or after July 1, 2024 include a 7-year parts, labor, and compressor warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.