Key specifications
- Construction
- All Welded
- Dimensions
- 56.0"W × 16.0"D × 52.0"H
- Type
- Pantleg Duct
- Application Type
- Type II
- Dish Machine Type
- Conveyor
- Dish Machine Size
- 44 in
Spec sheet
Avtec SimpleSpec SSA-PANTLEG44 Type II Stainless Steel Dishwasher Pantleg Duct for 44-Inch Conveyor Dish Machines
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Avtec SimpleSpec SSA-PANTLEG44 is an exhaust-only condensate pantleg duct designed for Type II applications over 44-inch conveyor dish machines with 4 in x 16 in vent cowls.
- All-welded stainless steel construction
- Includes a 10 in x 10 in stainless steel ceiling trim ring shipped loose
- Includes a single-thickness offset to fit the dish machine vent cowl
- Nominal dimensions: 56 in W x 16 in D x 52 in H
- Designed and manufactured in the United States
Overall Dimensions:
56.0"W x 16.0"D x 52.0"HProduct Weight:
250.0 lbType II Application
Designed for Type II applications only.
44-Inch Conveyor Dish Machine Fit
Fits 44-inch conveyor dish machines that include 4 in x 16 in vent cowls.
All-Welded Construction
Constructed from all-welded stainless steel with welded seams.
Vent Cowl Offset
Includes a single-thickness offset to fit the dish machine vent cowl.
Ceiling Trim Ring
Includes a 10 in x 10 in stainless steel ceiling trim ring shipped loose.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.