Key specifications
- Dimensions
- 72.0"W × 30.0"D × 40.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Straight
- Direction
- Right-to-Left
Spec sheet
AERO 3SD-R-72 Soiled Dish Table, Straight, Right-to-Left, 72"W x 30"D x 40"H, 16-Gauge 304 Stainless Steel, 7"H Splash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO 3SD-R-72 is a straight soiled dish table for right-to-left operation. It measures 72 inches wide by 30 inches deep by 40 inches high and has a 16-gauge 304 stainless steel top, 7-inch backsplash with 2-inch sanitary return, and a 20-inch wide by 20-inch front-to-back by 5-inch deep fabricated pre-rinse sink.
The table has 8-inch on-center splash-mount faucet holes, fully welded stainless steel gussets, 16-gauge 304 stainless steel legs and side cross bracing, adjustable white metal feet, and an Aero Hemmed Safety Edge.
Overall Dimensions:
72.0"W x 30.0"D x 40.0"HProduct Weight:
120.0 lbRight-to-Left Operation
Configured for right-to-left operation.
Fabricated Pre-Rinse Sink
Includes a 20-inch wide by 20-inch front-to-back by 5-inch deep fabricated pre-rinse sink.
Splash-Mount Faucet Holes
Provides 8-inch on-center splash-mount faucet holes; the faucet is not included.
Backsplash
Includes a 7-inch backsplash with a 2-inch sanitary return.
Stainless Steel Construction
Uses 16-gauge 304 stainless steel for the top, legs, and side cross bracing.
Welded Gussets
Fully welded stainless steel gussets support the sink.
Adjustable Feet
Includes adjustable white metal feet.
Hemmed Safety Edge
Features an Aero Hemmed Safety Edge.
Knockdown Assembly
Specified as KD construction.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.