Key specifications
- Dimensions
- 72.0"W × 30.0"D × 36.0"H
- Type
- Dish Table
- Style
- Soiled
- Installation Type
- Undercounter
- Material
- 304 Stainless Steel
- Operation
- Left-to-Right
Spec sheet
AERO Aerospec 2USD-L-72 Undercounter Soiled Dish Table, 72"W, Left-to-Right, Stainless Steel, 10"H Backsplash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Aerospec 2USD-L-72 is an undercounter soiled dish table with left-to-right operation, a 14-gauge 304 stainless steel top, and a 10 in backsplash with a 2 in sanitary return.
It features a fabricated 20 in wide x 20 in front-to-back x 5 in deep pre-rinse sink, 8 in on-center splash-mount faucet holes, stainless steel legs and side cross bracing, adjustable stainless steel feet, fully welded stainless steel gussets, and an Aero Hemmed Safety Edge.
- 72 in wide x 30 in deep construction
- NSF certification
- KD construction
Overall Dimensions:
72.0"W x 30.0"D x 36.0"HProduct Weight:
115.0 lbUndercounter Design
Configured as a soiled undercounter dish table.
Left-to-Right Operation
The catalog specifies left-to-right operation, with the sink located left of the machine.
Stainless Steel Top
The top is constructed from 14-gauge 304 stainless steel.
Backsplash
Includes a 10 in backsplash with a 2 in sanitary return.
Fabricated Pre-Rinse Sink
The sink measures 20 in wide x 20 in front-to-back x 5 in deep.
Faucet Holes
Provides 8 in on-center splash-mount faucet holes; the faucet is not included.
Support Structure
Includes fully welded stainless steel gussets, 16-gauge 304 stainless steel legs and side cross bracing, and adjustable stainless steel feet.
Safety Edge
Features the Aero Hemmed Safety Edge and KD construction.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.