Key specifications
- Dimensions
- 43.0"H
- Type
- Dish Table
- Style
- Soiled
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Island
Spec sheet
AERO Aerospec 2SDL-L-84 Soiled Dish Table, 84" End x 72" Machine-to-Corner, Left-to-Right, 14/304 Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Aerospec 2SDL-L-84 is a soiled dish table for left-to-right operation, with 72-inch machine-to-corner and 84-inch corner-to-end dimensions.
- Top: 14-gauge 304 stainless steel with a 10-inch backsplash and 2-inch sanitary return.
- Sink: 20 x 20 x 5-inch fabricated pre-rinse sink.
- Landing shelf: Includes an 84-inch wide by 12-inch deep shelf.
- Faucet holes: 8 inches on center for a splash-mount faucet; faucet is not included.
- Support: 16-gauge 304 stainless steel legs and side cross bracing with adjustable stainless steel feet.
- Construction: Fully welded stainless steel gussets and Aero Hemmed Safety Edge.
Knock-down construction and NSF certification are specified for this model.
Overall Dimensions:
43.0"HProduct Weight:
200.0 lbLeft-to-Right Operation
Configured for left-to-right operation.
Fabricated Pre-Rinse Sink
Includes a 20 x 20 x 5-inch fabricated pre-rinse sink.
Landing Shelf
Includes an 84-inch wide by 12-inch deep landing shelf.
Backsplash
10-inch backsplash with a 2-inch sanitary return.
Faucet Hole Pattern
Provides 8-inch on-center splash-mount faucet holes; faucet is not included.
Stainless Steel Support
Uses 16-gauge 304 stainless steel legs and side cross bracing with adjustable stainless steel feet.
Welded Gussets
Includes fully welded stainless steel gussets.
Hemmed Safety Edge
Uses the Aero Hemmed Safety Edge.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.