Key specifications
- Dimensions
- 43.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Island
- Direction
- Right-to-Left
Spec sheet
AERO Aerospec 2SDI-R-120 Right-to-Left Soiled Dish Table, 60" Machine-to-Corner x 120" Corner-to-End, 14/304 Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2SDI-R-120 is a right-to-left island soiled dish table with a 60-inch machine-to-corner length, 120-inch corner-to-end length, and 30-inch working depth.
It has a 14-gauge 304 stainless steel top, a 10-inch backsplash with a 2-inch sanitary return, and a 20 x 20 x 5-inch fabricated pre-rinse sink.
- 16-gauge 304 stainless steel legs and side cross bracing
- Adjustable stainless steel feet
- 8-inch on-center splash-mount faucet holes
- Aero Hemmed Safety Edge
Overall Dimensions:
43.0"HProduct Weight:
210.0 lbRight-to-Left Operation
Configured for right-to-left operation.
14-Gauge 304 Stainless Steel Top
The top is specified as 14-gauge 304 stainless steel.
Fabricated Pre-Rinse Sink
Includes a 20 x 20 x 5-inch fabricated pre-rinse sink.
10-Inch Backsplash
Includes a 10-inch backsplash with a 2-inch sanitary return.
Splash-Mount Faucet Holes
Provides 8-inch on-center splash-mount faucet holes.
Welded Stainless Steel Gussets
Includes fully welded stainless steel gussets.
Stainless Steel Legs and Cross Bracing
Uses 16-gauge 304 stainless steel legs and side cross bracing.
Adjustable Stainless Steel Feet
Includes adjustable stainless steel feet.
Aero Hemmed Safety Edge
Includes the Aero Hemmed Safety Edge.
Knock-Down Construction
Specified as KD construction.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.
