Key specifications
- Dimensions
- 43.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Island
- Finish
- No. 4 Blended
Spec sheet
AERO Aerospec 2SDI-L-72 Left-to-Right Soiled Dish Table, 60" x 72", 14/304 Stainless, 10" Splash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The 2SDI-L-72 is a left-to-right soiled island dish table with a 14-gauge 304 stainless steel top, a 10 in backsplash, and a fabricated pre-rinse sink.
Its 60 in machine-to-corner and 72 in corner-to-end layout is specified with a 30 in working depth and 43 in height.
- 20 in wide x 20 in front-to-back x 5 in deep fabricated pre-rinse sink
- 2 in sanitary return and 8 in on-center splash-mount faucet holes
- 16-gauge 304 stainless steel legs and side cross bracing
- Fully welded stainless steel gussets and adjustable stainless steel feet
- Hemmed safety edge and knockdown construction
- NSF certified
Overall Dimensions:
43.0"HProduct Weight:
180.0 lbLeft-To-Right Operation
The specified operating direction is left to right.
304 Stainless Steel Top
The top is 14-gauge 304 stainless steel.
Fabricated Pre-Rinse Sink
The table includes a 20 in wide x 20 in front-to-back x 5 in deep fabricated pre-rinse sink.
10 in Backsplash
The backsplash is 10 in high and has a 2 in sanitary return.
Faucet Hole Spacing
Splash-mount faucet holes are spaced 8 in on center; the faucet is not included.
Support Components
Fully welded stainless steel gussets support the sink, with 16-gauge 304 stainless steel legs and side cross bracing.
Adjustable Feet
The table has adjustable stainless steel feet.
Hemmed Safety Edge
The table has a hemmed safety edge.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.