Key specifications
- Dimensions
- 43.0"H
- Type
- Dish Table
- Shape
- Island
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Finish
- No. 4 Blended
Spec sheet
AERO Aerospec 2SDI-L-60 Left-to-Right Soiled Dish Table, 60" Machine-to-Corner, 60" Corner-to-End, 30"D, 14/304 Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Aerospec 2SDI-L-60 is a left-to-right island soiled dish table with a 60-inch machine-to-corner dimension, a 60-inch corner-to-end dimension, and a 30-inch working depth.
- 14-gauge 304 stainless steel top with a No. 4 blended finish
- 20 x 20 x 5 inch fabricated pre-rinse sink
- 10-inch backsplash with a 2-inch sanitary return
- 8-inch on-center splash-mount faucet holes; faucet not included
- 16-gauge 304 stainless steel legs and side cross bracing
- Fully welded stainless steel gussets and adjustable stainless steel feet
- Aero Hemmed Safety Edge and KD construction
Overall Dimensions:
43.0"HProduct Weight:
170.0 lbLeft-To-Right Operation
Designed for left-to-right dishwashing flow.
Island Layout
Measures 60 inches from machine to corner and 60 inches from corner to end.
Fabricated Pre-Rinse Sink
Includes a 20 x 20 x 5 inch fabricated pre-rinse sink.
Stainless Steel Top
The top is 14-gauge 304 stainless steel with a No. 4 blended finish.
Backsplash
Includes a 10-inch backsplash with a 2-inch sanitary return.
Faucet Hole Preparation
Provides 8-inch on-center splash-mount faucet holes; the faucet is not included.
Welded Support
Includes fully welded stainless steel gussets, 16-gauge 304 stainless steel legs, and side cross bracing.
Adjustable Feet
Stainless steel adjustable feet support the table.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.