Key specifications
- Dimensions
- 43.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Island
- Direction
- Left To Right
Spec sheet
AERO Aerospec 2SDI-L-48 Soiled Dish Table, 60" Machine-to-Corner x 48" End-to-Corner, Left-to-Right, 10" Splash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2SDI-L-48 is a soiled island dish table for left-to-right operation. It measures 60 inches machine-to-corner by 48 inches end-to-corner and has a 30-inch working depth.
It features a 14-gauge 304 stainless steel top, a 10-inch backsplash with a 2-inch sanitary return, and a fabricated 20 x 20 x 5 inch pre-rinse sink. The legs and side cross bracing are 16-gauge 304 stainless steel with adjustable stainless steel feet.
- 8-inch on-center splash-mount faucet holes; faucet not included.
- Fully welded stainless steel gussets support the sink.
- Aero Hemmed Safety Edge helps eliminate cuts from rough edges.
- NSF certified.
Overall Dimensions:
43.0"HProduct Weight:
160.0 lb304 Stainless Steel Construction
The top is 14-gauge 304 stainless steel, while the legs and side cross bracing are 16-gauge 304 stainless steel.
Fabricated Pre-Rinse Sink
The sink measures 20 inches wide by 20 inches front-to-back by 5 inches deep.
10-Inch Backsplash
The backsplash includes a 2-inch sanitary return.
Left-To-Right Operation
Adjustable Stainless Steel Feet
The table includes adjustable stainless steel feet.
Splash-Mount Faucet Holes
The table has 8-inch on-center splash-mount faucet holes; the faucet is not included.
Fully Welded Stainless Steel Gussets
Fully welded stainless steel gussets support the sink.
Aero Hemmed Safety Edge
The table is hemmed on the roll and backsplash to eliminate cuts from rough edges.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.