Key specifications
- Dimensions
- 43.0"H
- Type
- Dish Table
- Style
- Soiled
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Finish
- No. 4 Blended
Spec sheet
AERO Aerospec 2SDC-R-96 Right-to-Left Corner Soiled Dish Table, 60 x 96 in, 14-Gauge 304 Stainless Steel, 10 in Splash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2SDC-R-96 is a right-to-left corner soiled dish table with a 30 in working depth and 43 in height.
- 14-gauge 304 stainless steel top with a 10 in backsplash and 2 in sanitary return.
- Fabricated 20 in wide x 20 in front-to-back x 5 in deep pre-rinse sink.
- Includes 8 in on-center splash-mount faucet holes.
- Features stainless steel legs, side cross bracing, adjustable feet, welded gussets, and an Aero Hemmed Safety Edge.
Overall Dimensions:
43.0"HProduct Weight:
200.0 lbRight-To-Left Operation
Configured for right-to-left operation.
304 Stainless Steel Top
Constructed with a 14-gauge 304 stainless steel top.
Fabricated Pre-Rinse Sink
Includes a 20 in wide x 20 in front-to-back x 5 in deep fabricated sink.
10 in Backsplash
Includes a 10 in backsplash with a 2 in sanitary return.
Faucet Holes
Includes 8 in on-center splash-mount faucet holes; faucet is not included.
Welded Gussets
Uses fully welded stainless steel gussets for sink support.
Stainless Steel Legs and Cross Bracing
Includes 16-gauge 304 stainless steel legs and side cross bracing.
Adjustable Stainless Steel Feet
Includes adjustable stainless steel feet.
Aero Hemmed Safety Edge
Features the Aero Hemmed Safety Edge.
Knockdown Construction
Specified as KD construction.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.