Key specifications
- Dimensions
- 60.0"W × 30.0"D × 43.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Straight
- Direction
- Right-to-Left
Spec sheet
AERO Aerospec 2SD-R-60 Soiled Dish Table, Straight, Right-to-Left, 60"W x 30"D x 43"H, 14-Gauge 304 Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
2SD-R-60 is a straight soiled dish table for right-to-left operation. It measures 60 in W x 30 in D x 43 in H and has a 14-gauge 304 stainless steel top.
The table has a 10 in backsplash with a 2 in sanitary return, a 20 in W x 20 in front-to-back x 5 in deep fabricated pre-rinse sink, and 8 in on-center splash-mount faucet holes. The faucet is not included.
- Fully welded stainless steel gussets
- 16-gauge 304 stainless steel legs and side cross bracing
- Adjustable stainless steel feet
- Aero Hemmed Safety Edge
- KD design
NSF certification is specified.
Overall Dimensions:
60.0"W x 30.0"D x 43.0"HProduct Weight:
105.0 lbStraight design
The table has a straight design for right-to-left operation.
304 stainless steel top
The top is specified as 14-gauge 304 stainless steel.
Fabricated pre-rinse sink
The sink measures 20 in wide x 20 in front-to-back x 5 in deep.
Backsplash and sanitary return
The table has a 10 in backsplash with a 2 in sanitary return.
Splash-mount faucet holes
The table has 8 in on-center splash-mount faucet holes; the faucet is not included.
Welded stainless steel gussets
Fully welded stainless steel gussets are specified.
Stainless steel legs and cross bracing
The legs and side cross bracing are 16-gauge 304 stainless steel.
Adjustable stainless steel feet
Adjustable stainless steel feet are specified.
Aero Hemmed Safety Edge
The table is specified with an Aero Hemmed Safety Edge.
KD design
KD design is specified.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.