Key specifications
- Dimensions
- 48.0"W × 30.0"D × 43.0"H
- Type
- Dish Table
- Style
- Soiled
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Straight
Spec sheet
AERO Aerospec 2SD-R-48 Straight Soiled Dish Table, 48"W x 30"D x 43"H, Right-to-Left, 14-Gauge 304 Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Aerospec 2SD-R-48 is a straight soiled dish table with right-to-left operation, a 14-gauge 304 stainless steel top, and a fabricated pre-rinse sink.
It has a 10-inch backsplash with a 2-inch sanitary return, 8-inch on-center splash-mount faucet holes, 16-gauge 304 stainless steel legs and side cross bracing, adjustable stainless steel feet, and a hemmed safety edge.
- Overall dimensions: 48 inches wide by 30 inches deep by 43 inches high.
- The faucet is not included.
Overall Dimensions:
48.0"W x 30.0"D x 43.0"HProduct Weight:
93.0 lbRight-to-Left Operation
The specified operating direction is right to left.
304 Stainless Steel Top
The table top is constructed from 14-gauge 304 stainless steel.
Fabricated Pre-Rinse Sink
The sink measures 20 in wide x 20 in front-to-back x 5 in deep.
Backsplash
The backsplash is 10 in high and has a 2 in sanitary return.
Splash-Mount Faucet Holes
Faucet holes are spaced 8 in on center; the faucet is not included.
Welded Gussets
Stainless steel gussets are fully welded for sink support.
Stainless Steel Legs and Bracing
The 16-gauge 304 stainless steel legs and side cross bracing support the table.
Adjustable Feet
The table has adjustable stainless steel feet.
Hemmed Safety Edge
The table uses the Aero Hemmed Safety Edge design.
Knock-Down Construction
The product is specified as KD, or knock-down, construction.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.