Key specifications
- Dimensions
- 30.0"W × 30.0"D × 43.0"H
- Type
- Soiled Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Straight
- Direction
- Right-to-Left
Spec sheet
AERO Aerospec 2SD-R-30 Soiled Dish Table, Straight, Right-to-Left, 30"W x 30"D, 14/304 Stainless Steel, 10"H Backsplash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The 2SD-R-30 is a straight soiled dish table for right-to-left operation. It measures 30 inches wide by 30 inches deep by 43 inches high and includes a 10-inch backsplash with a 2-inch sanitary return.
Its 14-gauge 304 stainless steel top includes a 20-inch wide by 20-inch front-to-back by 5-inch deep fabricated pre-rinse sink. The table has 8-inch on-center splash-mount faucet holes; the faucet is not included.
- 16-gauge 304 stainless steel legs and side cross bracing
- Adjustable stainless steel feet
- Fully welded stainless steel gussets
- Hemmed safety edge on the table roll and backsplash
- Knockdown construction
- NSF certified
Overall Dimensions:
30.0"W x 30.0"D x 43.0"HProduct Weight:
75.0 lbRight-to-Left Operation
The table is specified for right-to-left operation.
Fabricated Pre-Rinse Sink
The sink measures 20 inches wide by 20 inches front-to-back by 5 inches deep.
10-Inch Backsplash
The backsplash is 10 inches high and has a 2-inch sanitary return.
Stainless Steel Construction
The top is 14-gauge 304 stainless steel; the legs and side cross bracing are 16-gauge 304 stainless steel.
Splash-Mount Faucet Holes
The table has 8-inch on-center faucet holes. The faucet is not included.
Adjustable Stainless Steel Feet
The stainless steel feet are adjustable.
Knockdown Construction
The product is specified as KD, or knockdown, construction.
Hemmed Safety Edge
The table roll and backsplash use a hemmed safety-edge design.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.