Key specifications
- Dimensions
- 96.0"W × 30.0"D × 43.0"H
- Type
- Dish Table
- Style
- Soiled
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Straight
Spec sheet
AERO Aerospec 2SD-L-96 Soiled Dish Table, 96"W x 30"D x 43"H, Left-to-Right, 14-Gauge 304 Stainless Steel, 10"H Splash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2SD-L-96 is a straight, left-to-right soiled dish table with a 14-gauge 304 stainless steel top, 10-inch backsplash, and 96-inch overall width.
It includes a 20 x 20 x 5-inch fabricated pre-rinse sink, 8-inch on-center splash-mount faucet holes, fully welded stainless steel gussets, stainless steel legs and side cross bracing, and adjustable stainless steel feet.
- 10-inch backsplash with 2-inch sanitary return
- Hemmed safety edge
- Knock-down construction
- NSF certified
Overall Dimensions:
96.0"W x 30.0"D x 43.0"HProduct Weight:
140.0 lb304 Stainless Steel Top
The top is made from 14-gauge 304 stainless steel.
Left-To-Right Operation
The table is configured for left-to-right operation.
10-Inch Backsplash
The backsplash is 10 inches high and includes a 2-inch sanitary return.
Fabricated Pre-Rinse Sink
The table includes a 20-inch wide by 20-inch front-to-back by 5-inch deep fabricated pre-rinse sink.
Splash-Mount Faucet Holes
The backsplash has faucet holes spaced 8 inches on center; the faucet is not included.
Welded Stainless Steel Gussets
Fully welded stainless steel gussets support the sink.
Adjustable Stainless Steel Feet
The stainless steel feet are adjustable.
Hemmed Safety Edge
The table uses the Aero Hemmed Safety Edge design.
Knock-Down Construction
The specification identifies the table as KD.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.