Key specifications
- Dimensions
- 30.0"W × 30.0"D × 43.0"H
- Type
- Soiled Dish Table
- Style
- Straight
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Stainless Gauge
- 14 Gauge
Spec sheet
AERO Aerospec 2SD-L-30 Soiled Dish Table, Straight, Left-to-Right, 30"W x 30"D x 43"H, 14-Gauge 304 Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2SD-L-30 is a straight soiled dish table designed for left-to-right operation. It has a 14-gauge 304 stainless steel top, a 10 in backsplash with a 2 in sanitary return, and a fabricated pre-rinse sink measuring 20 in wide by 20 in front-to-back by 5 in deep.
- Includes 8 in on-center splash-mount faucet holes; faucet is not included.
- Features 16-gauge 304 stainless steel legs and side cross bracing with adjustable stainless steel feet.
- Uses fully welded stainless steel gussets, a No. 4 blended finish, Aero Hemmed Safety Edge, and knockdown construction.
Overall Dimensions:
30.0"W x 30.0"D x 43.0"HProduct Weight:
75.0 lbLeft-To-Right Operation
Straight dish table configuration for left-to-right operation.
Fabricated Pre-Rinse Sink
20 in wide x 20 in front-to-back x 5 in deep sink.
304 Stainless Steel Construction
14-gauge 304 stainless steel top with 16-gauge 304 stainless steel legs and side cross bracing.
Backsplash And Sanitary Return
10 in backsplash with a 2 in sanitary return.
Faucet Hole Spacing
Splash-mount faucet holes spaced 8 in on center; faucet is not included.
Adjustable Feet
Adjustable stainless steel feet.
Hemmed Safety Edge
The table and backsplash use the Aero Hemmed Safety Edge.
Knockdown Construction
KD construction for the product.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.