Key specifications
- Construction
- Fully Welded Stainless Steel Gussets
- Dimensions
- 43.0"H
- Type
- Dish Table
- Style
- Clean
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
Spec sheet
AERO Aerospec 2CDI-L-96 Right-to-Left Clean Dish Table, 14-Gauge 304 Stainless Steel, 60" x 96", 10" Splash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2CDI-L-96 is a clean island dish table specified for right-to-left operation. Its layout measures 60 inches from machine to corner and 96 inches from corner to end, with a 30-inch working depth and 43-inch height.
The table has a 14-gauge 304 stainless steel top, a 10-inch backsplash with a 2-inch return on the short side, raised rolled edges, and an Aero Hemmed Safety Edge. It also includes fully welded stainless steel gussets, 16-gauge 304 stainless steel legs, adjustable crossbracing, and adjustable stainless steel feet.
The unit has knockdown construction and NSF certification.
Overall Dimensions:
43.0"HProduct Weight:
160.0 lbRight-To-Left Operation
The dish table is specified for right-to-left operation.
Island Layout
The model has a 60 in machine-to-corner dimension and a 96 in corner-to-end dimension.
304 Stainless Steel Top
The top is constructed from 14-gauge 304 stainless steel.
Backsplash
The backsplash is 10 in high with a 2 in return on the short side.
Hemmed Safety Edge
The table includes the Aero Hemmed Safety Edge and raised rolled edges.
Welded Gussets
Fully welded stainless steel gussets are specified.
Adjustable Base Components
The unit has 16-gauge 304 stainless steel legs, adjustable crossbracing, and adjustable stainless steel feet.
Knockdown Construction
The specification identifies the unit as KD.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.