Key specifications
- Dimensions
- 43.0"H
- Type
- Dish Table
- Style
- Clean
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Island
Spec sheet
AERO Aerospec 2CDI-L-120 Right-to-Left Clean Dish Table, 14-Gauge 304 Stainless Steel, 60" x 120", 10" Backsplash
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The AERO Aerospec 2CDI-L-120 clean dish table is an island-style table designed for right-to-left operation. It has a 60-inch machine-to-corner section, a 120-inch corner-to-end section, a 30-inch working depth, and a 43-inch height.
The top is 14-gauge 304 stainless steel with a 10-inch backsplash and a 2-inch return on the short side. Raised rolled edges, fully welded stainless steel gussets, 16-gauge 304 stainless steel legs and adjustable crossbracing, adjustable stainless steel feet, and an Aero Hemmed Safety Edge™ are specified.
The table has a #4 blended finish, knock-down construction, and NSF certification.
Overall Dimensions:
43.0"HProduct Weight:
170.0 lbRight-To-Left Operation
Configured for right-to-left operation.
Island Configuration
Listed as an island clean dishtable.
304 Stainless Steel Top
The top is specified as 14-gauge 304 stainless steel.
Backsplash
Includes a 10-inch backsplash with a 2-inch return on the short side.
Structural Support
Includes fully welded stainless steel gussets, 16-gauge 304 stainless steel legs, adjustable crossbracing, and adjustable stainless steel feet.
Hemmed Safety Edge
Uses the Aero Hemmed Safety Edge™ design.
Blended Finish
Polished to a #4 blended finish.
Knock-Down Construction
Specified as KD, or knock-down, construction.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.