132" x 24" Super Saver Stainless Steel Work Table – Open Base
Advance Tabco TAG-2411 | NSF ListedBuilt for high-volume prep lines, the TAG-2411 combines a rugged 16-gauge type 430 stainless steel top with a cost-saving galvanized base. At 11 feet long, it delivers a generous, sanitary workspace while the open-base design keeps the floor clear for bulk storage, ingredient carts or trash bins.
Key Benefits
- 16 ga. type 430 stainless steel top – durable, corrosion-resistant & easy to sanitize.
- 1 ⅝" sanitary rolled rims (front & back) with square side edges prevent drips and speed cleanup.
- Two roll-formed galvanized hat channels bonded to the underside keep the long top flat under load.
- Galvanized 1 ⅝" Ø legs with side & rear tubular cross-bracing for rock-solid stability.
- Open base offers unobstructed access for ingredient totes, stock pots, bussing tubs and more.
- 1" adjustable plastic bullet feet level the table on uneven floors without marring tile.
- Sound-deadened top reduces prep-area noise.
- TIG-welded construction with polished seams for a professional finish.
- Pre-engineered angle adapters make future drawer installation fast and economical.
- NSF certified for food-zone use; ships knocked-down to minimize freight cost.
Specifications
| Manufacturer / Series | Advance Tabco – Super Saver TAG Series |
|---|---|
| Model # | TAG-2411 |
| Overall Dimensions | 132" L × 24" W × 35 ⅛" H (adjustable) |
| Work Surface | Flat top, 16-gauge 430 stainless steel, satin finish |
| Edge Style | 1 ⅝" rolled rim (front/rear) & square side edges |
| Under-top Reinforcement | 2 galvanized hat channels (bonded & welded) |
| Legs | (6) 1 ⅝" Ø galvanized steel tubular legs |
| Cross-Bracing | Rear: 1 ⅝" Ø galvanized tube Side: 1 ¼" Ø galvanized tube |
| Feet | 1" height-adjustable plastic bullet feet |
| Load Capacity (distributed) | ≈ 960 lb (see note below) |
| Ship Weight | ≈ 251 lb (ships KD) |
| Certifications | NSF |
Load rating based on Advance Tabco guidelines for 16-gauge tops over 84" with center leg support, adjusted for open-base configuration. Do not exceed published capacities.
Ideal For
- High-volume food prep lines
- Ingredient staging or plating counters
- Bakery, deli, catering & commissary operations
- Back-of-house storage/intermediate work areas
Assembly Required: Ships knocked-down. All hardware & instructions included; basic tools required.
Advance Tabco continuously improves products; specifications are subject to change without notice.
$1,578.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Advance Tabco 132" x 24" stainless prep table with 16-gauge 430 top, galvanized legs, crossrails, adjustable feet; NSF-certified durability for kitchens.
Manufacturer
Advance Tabco
Certifications
NSF
Height
35.5in
Width
132.0in
Depth
24.0in
Shipping Weight
251.0lbs
Table Edge Type
rounded / rolled / bullnose edge
Width (side - side)
132" wide (side - side)
Base Type
open with side & rear crossrails
Top Stainless Series
400 series top
Splash Height
flat top (without backsplash)
Base Construction
galvanized base
Depth (front - back)
24" deep (front - back)
Top Gauge
16 gauge top
Specifications
Work Table, 132"W x 24"D, 16 gauge 430 stainless steel top, galvanized legs with side & rear crossrails, adjustable plastic bullet feet, NSF
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.