Key specifications

Amps
8 Amps
Phase
1-Phase
Dimensions
77.75"W × 30.75"D × 34.13"H
Type
Cold Pan Table
Style
Enclosed Base
Installation Type
Floor Model
Spec sheet
Advance Tabco SKU: MACP-5-BS UPC: 747545184986

Advance Tabco MACP-5-BS 5-Pan Refrigerated Cold Pan Table

$9,078.00
/each
Estimated to ship in 4–7 business days Free Shipping
Width
Base Style
Adapter bars
Included: Advance Tabco warranty 90-day parts-only warranty from factory shipment; on refrigerated models, refrigeration components are covered 12 months parts and labor

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $840/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Cold Pan Table
Style Enclosed Base
Installation Type Floor Model
Material 304 Stainless Steel
Finish Stainless Steel
Size 77.75 in W x 30.75 in D x 34.13 in H
Mobility Stationary
Cooling Type Refrigerated
Pan Capacity 5 Pans
Pan Size 12 in x 20 in
Well Dimensions 73.25 in W x 20 in D x 8 in Deep
Well Insulation Fully Insulated
Controls Digital Programmable Thermostat
Refrigeration Type Self-Contained
Refrigerant Type R290
Voltage 115 Volts
Amps 8 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 ft
Compressor Horsepower 1/3 HP
Drain Size 1 in
Cutting Board Material White Thermoplastic
Cutting Board Dimensions 8 in D x 3/8 in Thick
Storage Open Rear Storage
Foot Type Adjustable Plastic Bullet Feet

Description

The Advance Tabco MACP-5-BS is a refrigerated cold pan table with a five-pan well, enclosed front and sides, and rear open storage.

The fully insulated 73-1/4-inch W x 20-inch D x 8-inch deep well accommodates five 12-inch x 20-inch pans up to 6-1/4 inches deep. A digital programmable thermostat controls the self-contained refrigeration system, which uses R290 refrigerant.

The stainless steel table includes an 8-inch-deep, 3/8-inch-thick white thermoplastic cutting board, a 1-inch drain, and adjustable plastic bullet feet. It is intended to maintain food that is already chilled rather than cool warm food.

  • Overall dimensions: 77-3/4 inches W x 30-3/4 inches D x 34-1/8 inches H
  • Electrical specification: 115 volts, 8 amps, 60 Hz, single phase
  • Includes an 8-foot cord with a NEMA 5-15P plug

Overall Dimensions:

77.75"W x 30.75"D x 34.13"H

Product Weight:

320.0 lb

Five-Pan Refrigerated Well

The fully insulated 73-1/4-inch W x 20-inch D x 8-inch deep well accommodates five 12-inch x 20-inch pans up to 6-1/4 inches deep.

Enclosed Base

The front and sides are enclosed, with rear open storage.

Self-Contained Refrigeration

The refrigeration system is housed in the understructure and uses R290 refrigerant.

Digital Programmable Thermostat

Provides programmable control for the refrigerated well.

304 Stainless Steel Construction

The cabinet base, top, and liner are specified as 304 stainless steel.

Cutting Board

The unit is specified with a white thermoplastic cutting board measuring 8 inches deep and 3/8 inch thick.

Adjustable Bullet Feet

Adjustable plastic bullet feet support the table.

Expansion Valve

An expansion valve is specified for refrigeration operation at various temperature conditions.

Proposition 65: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Frequently Asked Questions

Its 73-1/4-inch W x 20-inch D x 8-inch deep well accommodates five 12-inch x 20-inch pans up to 6-1/4 inches deep.
No. The unit is designed to maintain food that is already chilled and is not designed to cool food that was originally warm.
It uses self-contained refrigeration with R290 refrigerant and a digital programmable thermostat.
The overall dimensions are 77-3/4 inches W x 30-3/4 inches D x 34-1/8 inches H.
The cutsheet specifies 115 volts, 8 amps, 60 Hz, single-phase operation with an 8-foot cord and a NEMA 5-15P plug.
Yes. The front and sides are enclosed, and the rear provides open storage.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030