Key specifications
- Amps
- 8 Amps
- Phase
- 1-Phase
- Dimensions
- 62.5"W × 30.75"D × 34.13"H
- Type
- Cold Pan Table
- Style
- Enclosed Base
- Installation Type
- Floor Model
Advance Tabco MACP-4-BS 4-Pan Refrigerated Cold Pan Table
- Enclosed
- Enclosed with Sliding Doors
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The MACP-4-BS is a four-pan refrigerated cold pan table with a fully insulated well, enclosed stainless steel front and sides, and rear open storage.
The 57.5-inch-wide by 20-inch-deep by 8-inch-deep well accommodates four 12-inch by 20-inch pans up to 6-1/4 inches deep. A digital programmable thermostat, self-contained R290 refrigeration system, and 8-inch-deep cutting board support serving and preparation workflows.
- Overall dimensions: 62-1/2 inches wide by 30-3/4 inches deep by 34-1/8 inches high
- 8-inch-deep, 3/8-inch-thick white thermoplastic cutting board
- 115-volt, 8-amp, single-phase operation with an 8-foot cord and NEMA 5-15P plug
- Includes a 1-inch drain and adjustable plastic bullet feet
Overall Dimensions:
62.5"W x 30.75"D x 34.13"HProduct Weight:
365.0 lbFour-Pan Refrigerated Well
The fully insulated well accommodates four 12 x 20-inch pans up to 6-1/4 inches deep.
Enclosed Stainless Steel Base
The front and sides are enclosed, with open storage at the rear.
Self-Contained Refrigeration
The refrigeration system is housed in the understructure and uses R290 refrigerant.
Digital Programmable Thermostat
Provides programmable temperature control for the refrigerated well.
Integrated Cutting Board
The unit has an 8-inch-deep, 3/8-inch-thick white thermoplastic cutting board.
Stainless Steel Construction
The cabinet base, top, and liner use stainless steel construction.
Drain and Adjustable Feet
Includes a 1-inch drain and adjustable plastic bullet feet.
Electrical Connection
Uses 115-volt, 8-amp, 60 Hz, single-phase operation with an NEMA 5-15P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.