Key specifications
- Amps
- 8 Amps
- Phase
- 1-Phase
- Dimensions
- 62.5"W × 36.25"D × 35.0"H
- Type
- Refrigerated Cold Pan
- Style
- Open Rear
- Installation Type
- Floor Model
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Advance Tabco HDRCP-4-BS is a refrigerated cold pan buffet station with self-contained refrigeration and an open rear design.
It accommodates four 12 x 20-inch pans up to 6.25 inches deep, with additional space below for cold air circulation. The top, liner, and body are constructed of 304 stainless steel. The top has a black polyethylene thermal breaker marine edge, and the liner has a 3-inch recessed top.
- Programmable digital thermostat
- 1/3 HP self-contained refrigeration system using R290 refrigerant
- Stainless steel shelf with an 8-inch-deep, 3/8-inch-thick poly cutting board
- 120-volt, 8-amp, single-phase electrical connection with NEMA 5-15P plug
Overall Dimensions:
62.5"W x 36.25"D x 35.0"HProduct Weight:
461.0 lbFour-Pan Capacity
Accommodates four 12 x 20-inch pans up to 6.25 inches deep, with additional space below for cold air circulation.
Self-Contained Refrigeration
Uses a self-contained 1/3 HP refrigeration system with R290 refrigerant.
Programmable Digital Thermostat
Provides programmable digital temperature control.
304 Stainless Steel Construction
The top, liner, and body are specified in 304 stainless steel; the liner has a 3-inch recessed top.
Open Rear Design
The unit has an open rear base design.
Cutting Board Shelf
Includes a stainless steel shelf with an 8-inch-deep, 3/8-inch-thick poly cutting board.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.