132" × 36" Stainless Steel Work Table w/ 1 ½" Rear Splash
Advance Tabco FMG-3611 • Standard Series – Undershelf StyleGive your high-volume kitchen the uninterrupted prep space it deserves. This 11-foot Advance Tabco work table pairs a heavy-duty 16-gauge 304 stainless steel top with rugged galvanized support components to deliver years of reliable, NSF-approved performance.
Key Features
- Extra-large 132" (L) × 36" (D) work surface handles multiple prep stations at once.
- 16 ga. type 304 stainless steel top is sound-deadened and mechanically polished to a satin finish for easy cleanup.
- 1 ½" high rear up-turn (splash) plus 1 ⅝" sanitary rolled rim on front and square sides keep liquids where they belong.
- Three roll-formed galvanized hat channels are stud-welded under the top for superior rigidity.
- Pre-engineered welded drawer adapters make it simple to add drawers later (sold separately).
- Adjustable 18 ga. galvanized undershelf secured by die-cast clamps—no exposed nuts or bolts.
- Six 1 ⅝" Ø galvanized legs (units ≥ 8 ft. come standard with 6 legs) for maximum stability.
- Adjustable plastic bullet feet level the table on uneven floors without marring surfaces.
- TIG-welded stainless & galvanized gussets throughout for long-lasting strength.
- NSF Listed – fully compliant for food-zone use.
- Ships knocked-down (KD) to minimize freight costs; straightforward field assembly.
Load Capacities
Capacities shown are for evenly distributed loads per Advance Tabco’s Work Table Load Capacity Guide. Do not exceed the combined maximum of 1,800 lb.
| Table Top | 16 ga. stainless – over 84" long with center legs: 1,200 lb. +10 % for 1 ½" rear splash → ≈ 1,320 lb. |
|---|---|
| Undershelf | Standard galvanized undershelf with center legs: 450 lb. |
| Total (Top + Shelf) | Not to exceed 1,800 lb. |
Specifications
| Model # | FMG-3611 |
|---|---|
| Overall Dimensions | 132" L × 36" D × 35 ½" H (work height) + 1 ½" rear splash |
| Top Material | 16 ga. type 304 stainless steel, satin finish, sound-deadened |
| Splash / Edges | 1 ½" single-metal rear up-turn, 1 ⅝" sanitary rolled front rim, square sides |
| Reinforcement | 3 galvanized hat channels, welded & structural adhesive |
| Undershelf | 18 ga. galvanized steel, height-adjustable, die-cast shelf clamps |
| Legs | 1 ⅝" Ø galvanized steel tubing (6 legs) |
| Feet | 1" adjustable plastic bullet feet |
| Shipping Weight | Approx. 358 lb. |
| Compliance | NSF Listed • Meets ANSI standard for food-zone equipment |
| Assembly | Ships KD – hardware & instructions included |
Need a different size or all-stainless construction?
Advance Tabco’s Standard Series is available from 24" × 30" up to 144" × 36" with either stainless (FMS) or galvanized (FMG) bases. Contact us for custom quotes and accessories.
Advance Tabco’s Standard Series is available from 24" × 30" up to 144" × 36" with either stainless (FMS) or galvanized (FMG) bases. Contact us for custom quotes and accessories.
$2,250.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Advance Tabco 132" x 36" stainless prep table. 16‑ga 304 top w/ 1.5" rear upturn, adjustable galvanized undershelf, NSF, adjustable legs.
Manufacturer
Advance Tabco
Certifications
NSF
Height
37.0in
Width
132.0in
Depth
36.0in
Shipping Weight
358.0lbs
Top Stainless Series
300 series top
Base Type
open with undershelf
Table Edge Type
square / flat edge
Width (side - side)
132" wide (side - side)
Depth (front - back)
36" deep (front - back)
Splash Height
1-1/2" backsplash / upturn
Base Construction
galvanized base
Top Gauge
16 gauge top
Specifications
Work Table, 132"W x 36"D, 16 gauge 304 stainless steel top with 1-1/2"H rear up-turn, 18 gauge adjustable galvanized undershelf, galvanized legs with adjustable plastic bullet feet, NSF
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.