Key specifications

Amps
42 Amps Per Cavity
Phase
3-Phase
Dimensions
26.63"W × 27.88"D × 55.36"H
Type
Convection Steamer
Style
Double-Stacked
Installation Type
Floor Model
Spec sheet
AccuTemp SKU: E3/E62083E150 DBL

AccuTemp Evolution E3/E62083E150 DBL 9-Pan Convection Steamer

$25,177.90
/each
Estimated to ship in 3–6 business days
Stand base
Included: AccuTemp warranty One-year parts and labor limited warranty

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $2,329/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Convection Steamer
Style Double-Stacked
Installation Type Floor Model
Material 304 Stainless Steel
Country of Origin USA
Interior Finish Stainless Steel
Compartments 2
Pan Capacity 9 Full-Size Pans (3 Top, 6 Bottom)
Pan Size 12 x 20 x 2.5 Inches
Controls Digital
Voltage 208 Volts
Amps 42 Amps Per Cavity
Watts 15 kW Per Cavity
Hertz 60 Hz
Phase 3-Phase
Plug Type NEMA 15-50P
Cord Length 5 Feet
Cord Count 2 Cords
Water Connection 3/4-Inch Male Garden Hose Connector
Drain Connection 3/4-Inch Barbed Connector
Water Consumption Less Than 1 Gallon Per Hour
Water Filtration Not Required
Stand Stainless Steel Support Stand

Description

AccuTemp Evolution E3/E62083E150 DBL is a double-stacked, stand-mounted boilerless convection steamer with one 3-pan compartment and one 6-pan compartment.

Steam Vector Technology uses no moving parts inside the cooking chamber. Digital controls, a digital temperature display, an independent programmable timer, and automatic fill support daily operation. The configuration holds nine 12 x 20 x 2.5-inch full-size pans.

The steamer requires plumbed water and drain connections, uses less than 1 gallon of water per hour, and requires no water filtration or treatment. It includes a stainless steel support stand, two 5-foot power cords with NEMA 15-50P plugs, and is made in the USA.

Overall Dimensions:

26.63"W x 27.88"D x 55.36"H

Product Weight:

461.0 lb

Steam Vector Technology

Patented steam technology with no moving parts inside the cooking chamber.

Double-Stacked Configuration

Combines one 3-pan compartment and one 6-pan compartment in a stand-mounted configuration.

Digital Controls

Provides digital temperature display and an independent digital electronic timer with programmable preset.

Automatic Fill

Includes an automatic fill feature.

Water Management

Uses less than 1 gallon of water per hour and requires no water filtration or treatment.

Field-Reversible Door

Heavy-duty, one-piece door can be field reversed.

Dishwasher-Safe Components

Includes dishwasher-safe one-piece wire pan racks, steam collector and distribution panels, and a front-mounted condensate tray.

Support Stand

Includes a stainless steel support stand.

Frequently Asked Questions

It has two compartments: one 3-pan top compartment and one 6-pan bottom compartment.
The listed configuration holds nine 12 x 20 x 2.5-inch full-size pans, with three in the top compartment and six in the bottom compartment.
No. The product literature states that no water filtration or treatment is required.
The steamer requires plumbed water and drain connections and uses two 208 Volt, 60 Hz, 3-Phase electrical connections. Each steamer has a 5-foot cord with a NEMA 15-50P plug.
It includes a one-year parts and labor warranty. The limited warranty covers twelve months from installation or fifteen months from shipment, whichever occurs first, with registration required at installation.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030