3M Purification HF15-MS Water Filter Replacement Cartridge, 6 in, 1 GPM, 5 Micron, 3,500-Gallon, Sediment & Scale Reduction Case of 6
The 3M Purification HF15-MS is a replacement cartridge for commercial water filtration. It has a 6 in length, 5 micron rating, 1 gpm service flow rate, and 3,500 gallon capacity.
Documented claims include sediment and particulate reduction, chlorine taste and odor reduction, and scale-inhibitor performance. Use with potable water within the stated operating pressure and temperature ranges.
- Flush 2 gallons through the cartridge before use in the one-cartridge configurations listed in the performance data sheet.
- Do not install on hot water supply lines or use with microbiologically unsafe water without adequate disinfection.
Overall Dimensions:
3.25"W x 3.25"D x 6.0"HProduct Weight:
1.88 lb5-micron rating
The HF15-MS has a rated micron rating of 5 microns.
1 GPM service flow
The cartridge has a service flow rate of 1 gpm, or approximately 3.78 lpm.
3,500-gallon capacity
The rated capacity is 3,500 gallons for one-cartridge configurations listed in the performance data sheet.
Sediment and particulate claims
The exact-product specifications and cutsheet identify particulate or sediment reduction claims.
Chlorine taste and odor reduction
NSF testing reports a 97.3% average reduction under the stated test conditions.
Scale inhibitor
The HF15-MS is identified with a scale-inhibitor claim.
Operating range
The performance data sheet lists a water pressure range of 25 to 125 psi and a water temperature range of 40 to 100°F.
Pre-use flushing
For the one-cartridge configurations listed in the performance data sheet, flush 2 gallons through the cartridge before use.
Certifications & Compliance
Warranty & Protection
One-year limited warranty from the date of purchase against defects in material and manufacture.
Frequently Asked Questions
Need Help Deciding?
Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.