3M Purification DP390 Dual-Port Water Filtration System with Shut-Off Valve, 15 GPM, 0.2 Micron, 162,000-Gallon Capacity

SKU: DP390 GTIN: 00016145209918
$1,803.34
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

The 3M™ DP390 dual-port water filtration system is designed for multiple equipment applications, supplying two separate water streams at a combined flow rate of up to 15.0 gpm.

Its 0.2-micron filtration reduces bacteria, sediment, chlorine taste and odor, and cysts. A dedicated scale inhibition cartridge provides scale-inhibited water through one stream.

  • Includes a built-in pressure gauge, inlet water shut-off valve, outlet check valve, mounting brackets, three cartridge filters, and one scale inhibition cartridge.
  • Rated capacity is 162,000 gallons.
  • Inlet and outlet connections are 3/4-inch NPT.

Overall Dimensions:

29.0"W x 5.5"D x 24.13"H

Product Weight:

29.2 lb

Dual-port water flow

Two separate streams exit the manifold for simultaneous operation of multiple equipment applications.

0.2-micron filtration

The DP390 filter configuration reduces bacteria, sediment, chlorine taste and odor, and cysts.

Scale inhibition

A dedicated scale inhibition cartridge supplies scale-inhibited water through one stream.

Included system components

The system includes a built-in pressure gauge, inlet water shut-off valve, outlet check valve, mounting brackets, three cartridge filters, and one scale inhibition cartridge.

Plumbing connections

The inlet and outlet connections are 3/4-inch NPT.

Sanitary cartridge design

The cartridges use an O-ring seal design and are sanitary in design, requiring no contact with the filter media during cartridge change-out.

Operating limits

The system maximum operating pressure is 125 psi (862 kPa), and the maximum operating water temperature is 100°F (37.8°C).

Application Multiple equipment
Combined Service Flow Rate 15.0 gpm (56.8 lpm)
Nominal Micron Rating 0.2 micron
Capacity 162,000 gallons
Filtration Reductions Bacteria, sediment, chlorine taste and odor, and cysts
Port Configuration Dual port with two separate water streams
Inlet and Outlet Connections 3/4-inch NPT
Maximum Operating Pressure 125 psi (862 kPa)
Maximum Operating Temperature 100°F (37.8°C)
Cartridge Filters 3
Scale Inhibition Cartridge 1 dedicated cartridge

Frequently Asked Questions

The combined service flow rate is up to 15.0 gpm (56.8 lpm).
The DP390 reduces bacteria, sediment, chlorine taste and odor, and cysts.
The nominal filtration rating is 0.2 micron.
The system includes a built-in pressure gauge, inlet water shut-off valve, outlet check valve, mounting brackets, three cartridge filters, and one scale inhibition cartridge.
The inlet and outlet connections are 3/4-inch NPT.
Maximum operating pressure is 125 psi (862 kPa), and maximum operating water temperature is 100°F (37.8°C).
The listed dimensions are 29.0 inches wide, 5.5 inches deep, and 24.13 inches high.
The disposable filter cartridges must be replaced every 12 months, at the rated capacity, or sooner if a noticeable reduction in flow rate occurs.
The product is warranted against defects in material and manufacture for five years from the date of purchase. The filter cartridge or filter membrane is warranted for one year.
No. It should not be used with microbiologically unsafe or unknown-quality water without adequate disinfection before or after the system.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.