3M Purification BEV165 Water Filter System with Shut-Off Valve, Single Vessel, 3 Micron, 3.34 GPM, 35,000 Gallon Capacity

SKU: BEV165 GTIN: 00016145801044
$346.63
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

The BEV165 is a single-vessel water filter system with a shut-off valve for dual carbonator cold beverage dispensers.

It has a 3 micron rating, a service flow rate of up to 3.34 GPM, and a rated capacity of 35,000 gallons. The system is specified to reduce sediment and chlorine taste and odor.

  • Includes a pressure gauge, inlet water shut-off valve assembly, mounting bracket, and one cartridge filter.
  • Provides 1/2 in FNPT inlet and outlet connections.
  • Uses a Sanitary Quick Change (SQC) encapsulated cartridge design for quarter-turn cartridge change-outs.

Overall Dimensions:

8.0"W x 5.5"D x 17.63"H

Product Weight:

4.8 lb

Sediment and chlorine taste and odor reduction

The BEV165 is specified to reduce sediment and chlorine taste and odor.

35,000 gallon capacity

The rated capacity is 35,000 gallons (132,489 liters).

3.34 GPM service flow

The recommended service flow rate is up to 3.34 GPM (12.6 LPM).

Single-vessel configuration

The system uses a single cartridge filter.

Included shut-off valve and gauge

The system includes a pressure gauge and inlet water shut-off valve assembly.

Included mounting bracket

A mounting bracket is included with the system.

Sanitary Quick Change cartridge design

The encapsulated cartridge design supports quarter-turn cartridge change-outs.

NSF certification

The product is identified as NSF certified.

Application Dual carbonator cold beverage dispenser
Water application Higher turbidity water
Type Carbon filter / polyphosphate dispensing
Filter quantity 1
Micron rating 3 microns
Service flow rate 3.34 GPM (12.6 LPM)
Capacity 35,000 gallons (132,489 liters)
Reduction claims Sediment; chlorine taste and odor
Connections 1/2 in FNPT inlet and outlet
Included components Pressure gauge; inlet water shut-off valve assembly; mounting bracket; 1 cartridge filter
Maximum operating pressure 125 psi (862 kPa)
Maximum operating temperature 100°F (37.8°C)
Cartridge change-out Sanitary Quick Change (SQC), quarter-turn change-out
Cartridge replacement interval Every 12 months, at rated capacity, or when a noticeable reduction in flow rate occurs

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

Five-year limited warranty for the product against defects in material and manufacture; the filter cartridge or membrane is covered for one year from the date of purchase.

Frequently Asked Questions

The BEV165 is specified to reduce sediment and chlorine taste and odor.
The recommended service flow rate is up to 3.34 GPM (12.6 LPM), and the rated capacity is 35,000 gallons (132,489 liters).
The system includes a pressure gauge, inlet water shut-off valve assembly, mounting bracket, and one cartridge filter.
The inlet and outlet connections are 1/2 in FNPT.
The maximum operating pressure is 125 psi (862 kPa), and the maximum operating temperature is 100°F (37.8°C). The system should not be installed on hot water supply lines.
Replace the disposable cartridge every 12 months, at the rated capacity, or when a noticeable reduction in flow rate occurs.
3M Purification warrants the product against defects in material and manufacture for five years from the date of purchase. The filter cartridge or membrane is warranted for one year.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.