John Boos “Stallion” Stainless Steel Work Table
132 in W × 36 in D • 16 GA Type 300 SS Top • Rear 1.5 in RiserBuilt for heavy-duty commercial kitchens, labs and industrial prep areas, the Stallion Work Table delivers uncompromising strength, easy sanitation and legendary John Boos craftsmanship in an extra-long 11-foot footprint.
Key Benefits
- 16 GA Type 300 stainless steel top with #4 satin finish – food-safe, rust-resistant and easy to wipe clean.
- John Boos Stallion Safety Edge on the front for comfortable contact and drip control.
- 1.5 in rear up-turn (backsplash) keeps spills off the wall and contains mess.
- 90° turndown on both side edges for seamless line-up with adjoining equipment.
- Box-channel underside reinforcement plus sound-deadening tape for rock-solid stability and a quieter workspace.
- 1-5/8 in O.D. 16 GA stainless steel legs with side & rear adjustable tubular bracing.
- 1 in adjustable stainless steel bullet feet level the table on uneven floors.
- Ships knocked-down (KD) for lower freight cost and fast on-site assembly.
- Meets NSF & CSA-Sanitation standards for food-service safety.
At-a-Glance Specifications
| Manufacturer / Series | John Boos – Stallion Work Tables (ST6R1.5-SBK) |
|---|---|
| John Boos Model No. | ST6R1.5-36132SBK |
| Overall Dimensions | 132 in (335.3 cm) L × 36 in (91.4 cm) D × 35 3⁄4 in (90.8 cm) H* |
| Work Surface | 16 GA, Type 300 stainless steel with #4 polish |
| Backsplash / Edges | 1.5 in rear riser • Stallion Safety Edge (front) • 90° side turndowns |
| Under-structure | 1 × 2 in boxed-channel reinforcement, sound-deadening taped |
| Legs & Bracing | 1-5/8 in O.D. 16 GA tubular SS legs • 1-1/4 in O.D. 18 GA side/rear bracing (adjustable) |
| Weight / Capacity** | 158 lb (71.7 kg) net • 900 lb (408 kg) evenly-distributed load |
| Certifications | NSF Listed • CSA-Sanitation |
| Ships | Knocked-Down (KD) – assembly hardware included |
*Height measured to work surface; riser adds 1.5 in to overall rear height.
**Maximum weight capacity when load is evenly distributed.
Compatible Accessories (Sold Separately)
- Stainless steel drawers with or without locks
- Heavy-duty casters for mobile applications
- Single or double overshelves
- Integrated drop-in sinks and pot racks
Simple Care Tips
- Clean daily with non-chloride detergent and a soft cloth or sponge.
- Always wipe along the polish lines to maintain the satin finish.
- Avoid abrasive pads, wire brushes or cleaners containing bleach.
- For stubborn stains, use Bar Keepers Friend followed by John Boos Stainless Steel Polish.
Note: Prolonged exposure to chlorides may damage stainless steel. Rinse and dry surfaces promptly after contact with salty or acidic substances.
$2,095.18
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
John Boos 132" Stallion stainless prep table with 16/300 top, 1.5" upturn, safety edge, sturdy channel frame, adjustable legs; NSF/CSA certified.
Manufacturer
John Boos
Brand name
Stallion
Certifications
NSF, CSA-Sanitation
Height
37.25in
Width
132.0in
Depth
36.0in
Shipping Weight
158.0lbs
Depth (front - back)
36" deep (front - back)
Width (side - side)
132" wide (side - side)
Top Stainless Series
300 series top
Splash Height
1-1/2" backsplash / upturn
Table Edge Type
square / flat edge
Top Gauge
16 gauge top
Base Type
open with side & rear crossrails
Base Construction
stainless steel base
Specifications
Work Table, 132"W x 36"D, 16/300 stainless steel top with 1-1/2"H rear up-turn, with Stallion Safety Edge front, 90° turndown on sides, box channel understructure with sound deadening tape, stainless steel legs, side & rear adjustable bracing, adjustable bullet feet, NSF, CSA-Sanitation, KD
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.