John Boos “Stallion” 132" × 36" Stainless Steel Work Table w/ 5" Riser
Model ST4R5-36132GBK | NSF & CSA-Sanitation ListedEngineered for heavy production lines, the John Boos Stallion series lays out an expansive 11-foot prep surface that resists wear, vibration and corrosion day after day. From its 14-gauge type 300 stainless top to its six-leg galvanized base, this table is built to keep your kitchen, bakery or fabrication shop running at full tilt.
Top Performance Features
- 14-gauge type 300 stainless steel top with #4 satin polish.
- 5" integrated backsplash with 1" turndown keeps walls spotless.
- 1-1/2" Stallion Safety Edge front for comfortable, snag-free workflow.
- 90° turndown on both side edges for seamless table line-up.
- Box-channel understructure plus sound-deadening tape for rock-solid, low-noise performance.
- Heavy-duty 1-5/8" Ø, 16-gauge galvanized legs – six-leg design supports extra-long runs.
- Adjustable 1-1/4" Ø galvanized side & rear bracing adds lateral stability.
- 1" stainless steel bullet feet level the table in seconds.
- Ships knocked down (KD) to cut freight costs and fit through tight doorways; fast, bolt-together assembly on site.
Why Choose John Boos Stainless?
- TIG-welded seams are polished to match adjacent surfaces for a hygienic, professional finish.
- NSF & CSA-Sanitation certifications meet the strictest health-code requirements.
- Manufactured in Effingham, Illinois by John Boos & Co. – trusted by pros since 1887.
Technical Specifications
| Model No. | ST4R5-36132GBK |
|---|---|
| Overall Size | 132" L × 36" W |
| Work Surface Height | 35-3/4" (before backsplash) • ±1" via bullet feet |
| Top Material / Gauge | 14-ga, type 300 stainless, #4 satin |
| Backsplash | 5" H with 1" turndown |
| Front Edge | 1-1/2" Stallion Safety Edge |
| Side Edges | 90° turndown |
| Understructure | Full-length 1" × 2" box channel with sound-deadening tape |
| Legs | 1-5/8" Ø, 16-ga galvanized steel (6 legs) |
| Bracing | 1-1/4" Ø, 18-ga galvanized, adjustable (side & rear) |
| Feet | 1" adjustable stainless bullet feet |
| Weight Capacity* | 960 lb (evenly distributed) |
| Shipping | Knocked-down (KD) |
| Certifications | NSF, CSA-Sanitation |
| Country of Origin | USA |
*Maximum static load, evenly distributed across the work surface.
Care & Maintenance
- Clean routinely with mild, non-chloride detergents and a soft cloth or sponge.
- Avoid abrasive pads, wire brushes or cleaners containing bleach or quaternary salts.
- For stubborn stains, use Bar Keepers Friend followed by a stainless polish, wiping with the grain.
Installation Reminder:
For stability, legs and bracing must be fully tightened after leveling. Failure to properly assemble may reduce load rating.
$2,215.76
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
John Boos ST4R5-36132GBK 132" stainless prep table with 5" backsplash, Stallion Safety Edge, sound-deadened understructure, adjustable legs, NSF/CSA.
Manufacturer
John Boos
Brand name
Stallion
Certifications
NSF, CSA-Sanitation
Height
40.75in
Width
132.0in
Depth
36.0in
Shipping Weight
195.0lbs
Width (side - side)
132" wide (side - side)
Depth (front - back)
36" deep (front - back)
Base Construction
galvanized base
Top Gauge
14 gauge top
Top Stainless Series
300 series top
Splash Height
5" backsplash
Table Edge Type
beveled bottom / return
Base Type
open with side & rear crossrails
Specifications
Work Table, 132"W x 36"D, 14/300 stainless steel top with 5" backsplash, with Stallion Safety Edge front, 90° turndown on sides, box channel understructure with sound deadening tape, galvanized legs, side & rear adjustable bracing, adjustable bullet feet, NSF, CSA-Sanitation, KD
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.