Garland Master Series 34" Modular Even Heat Hot Top Range – 66,000 BTU
Model M43-3T | Natural or Propane GasBuilt to anchor a high-volume production line, Garland’s Master Series 34 inch modular hot-top range delivers uncompromising durability and the broad, even heat chefs expect from a premium suite range.
Key benefits
- Three independent 12" extra-heavy cast-iron Even Heat hot tops — perfect for stock pots, braising pans and rondeaus.
- 22,000 BTU cast-iron “H” burner per section (66,000 BTU total) provides fast recovery and uniform heat distribution edge-to-edge.
- Individual front-mounted control valves let you fine-tune each plate for simmering, sautéing or high-heat searing.
- Modular “T” design integrates seamlessly into a Master Series battery or can be mounted on a stand, countertop or refrigerated base (sold separately).
- All-stainless steel front and sides resist corrosion and wipe clean quickly; one-piece stainless drip tray simplifies daily maintenance.
- 7-1/2" deep stainless steel front rail creates a convenient plating or utensil landing zone.
- Field-selectable Natural or LP gas; factory-installed 1-1/4" NPT front gas connection (rear connection optional).
- CSA Flame, CSA Star and NSF listed for safety and sanitation compliance.
Chef-ready performance
- Full-surface heat pattern eliminates hot spots, making it ideal for large-diameter pots.
- Cast-iron tops hold heat and recover quickly after loading.
- Low-profile 9-1/2" height (without stand) preserves sight lines on an island suite.
- Combine with Garland open-burner, griddle, fryer or salamander modules to build your perfect cookline.
Specifications
| Cooking surface | 3 × 12" Even Heat hot tops (cast iron) |
|---|---|
| Total input | 66,000 BTU/hr (19.35 kW) |
| Burner rating | 22,000 BTU/hr each, cast-iron “H” burners |
| Gas type & pressure | Natural 6" WC | Propane 10" WC |
| Gas connection | 1-1/4" NPT front (rear optional) |
| Dimensions (WxDxH) | 34" × 38" × 9-1/2" (864 × 965 × 241 mm) without stand 34" × 38" × 36-3/8" (864 × 965 × 924 mm) with optional stand |
| Shipping weight | Approx. 280 lb (128 kg) |
| Clearances (combustible) | 11" sides | 6" rear |
| Certifications | CSA Flame, CSA Star, NSF |
Popular accessories & options
- Stainless steel equipment stand (24" or 34" height)
- Backguards: 10", 17" or 33" high; single or double-deck shelves
- Common front rail for battery installations (up to 102")
- Rear gas connection kit & gas regulator (3/4", 1" or 1-1/4")
- Gas flex hose with quick-disconnect & restraining device
- End caps & covers for battery end units
Stand, backguard and other accessories shown are sold separately. Specify gas type and accessory requirements at time of order.
Important: This heavy-duty commercial appliance is not approved for residential use. Installation must conform to all local codes and include an approved restraining device when mounted on casters or a stand.
$5,987.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Garland Master M43-3T 34" heavy-duty gas range with three 12" even-heat hot tops, 66,000 BTU, stainless steel, NSF/CSA certified for commercial kitchens.
Manufacturer
Garland
Brand name
Master
Certifications
NSF, CSA Star, CSA Flame
Height
10.0in
Width
34.0in
Depth
38.0in
Shipping Weight
300.0lbs
Top
(3) hot tops
Exterior Finish
stainless steel front & sides
Base
modular
Specifications
Master Series Heavy Duty Range, gas, 34", modular, (3) 12" even heat hot tops, stainless steel front & sides, 66,000 BTU, CSA Flame, CSA Star, NSF (Garland)
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.