Garland Master CG-60R 60" EnerLogic™ Gas Countertop Griddle
Rear-Drain | 5 Independent Electronic Zones | 150,000 BTUBuilt for high-volume kitchens that refuse to compromise on consistency, the Garland Master CG-60R pairs a massive 60 × 24 inch polished steel plate with precision electronic thermostats and energy-saving EnerLogic™ technology. Five powerful, yet efficient, 30,000 BTU “U”-shaped burners deliver even heat across the entire surface—so every pancake, steak or smash burger cooks exactly the way you want it, every time.
Key Features & Benefits
- 1" (25 mm) polished steel plate stores and distributes heat for fast recovery & perfect sears
- EnerLogic™ Technology trims energy consumption while maintaining plate temperature
- Five electronic thermostats (one every 12") with 150 – 450 °F range for zone cooking
- Electronic ignition with pilot indicator light—no manual lighting required
- Rear 3 1⁄2" grease trough feeds two 6"-deep drawers (1.6 gal / 6 L each) for quick, drip-free clean-ups
- All-stainless exterior, 8" back-splash & side splash guards contain splatter and simplify wipe-downs
- Full-width front rail protects controls and gives cooks a comfortable working edge
- 6" adjustable stainless legs keep the unit level and allow vital airflow underneath
- Field-convertible for natural gas or LP; factory-installed ¾" rear gas regulator included
- Certified CSA & NSF for worry-free code compliance
Technical Specifications
| Cooking surface | 60" W × 24" D (1,440 in² / 0.93 m²) |
|---|---|
| Plate thickness | 1" (25 mm) polished carbon steel |
| Heat zones / burners | 5 “U”-shaped, 30,000 BTU each |
| Total input | 150,000 BTU/hr (44 kW) |
| Thermostat range | 150 °F – 450 °F (65 °C – 232 °C) |
| Controls | Main power switch plus individual on/off & temperature control per zone |
| Electrical | 120 V, 60 Hz, 1 A, 6' (1829 mm) cord & plug |
| Gas connection | ¾" NPT rear, centered |
| Manifold pressure (post-regulator) | Natural 3.5" W.C. • LP 10" W.C. |
| Minimum supply pressure | Natural 7" W.C. • LP 11" W.C. |
| Grease drawers | 2 × 1.6 gal (6 L) capacity, 6" deep, stainless steel |
| Clearances (combustible) | 6" sides • 6" rear |
| Certifications | CSA, NSF |
Popular Options & Accessories
- 208-240 V control circuit (no-charge substitution)
- Protective shield for thermostat knobs
- ¾" × 36" quick-disconnect hose with restraining device
- Stainless open stand with shelf (adjustable legs or casters)
- 4" low-profile legs & 3¼" grease drawer for refrigerated base mounting
Installation note: This griddle must be installed on legs or an approved stand for proper ventilation and, if equipped with casters, secured with a restraining device. Commercial cooking equipment requires a professionally designed exhaust system in accordance with NFPA 96 and all local codes.
$12,150.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Garland CG-60R Master gas griddle: 60" countertop, 1" polished steel plate, 150,000 BTU, electronic controls/ignition, rear drain, stainless exterior.
Manufacturer
Garland
Brand name
Master
Certifications
NSF, CSA
Height
21.0in
Width
60.0in
Depth
38.75in
Shipping Weight
765.0lbs
Cooking Surface Width (side - side)
55" - 60"
Griddle Plate Finish
smooth steel
Plate Thickness
1"
Controls
thermostat / solid state controls
Cooking Surface Depth (front - back)
24" - 29"
Exterior Finish
all stainless steel exterior
Specifications
Master Griddle, countertop, gas, rear drain, 60" W x 24" D cooking surface, 1" thick polished steel griddle plate, electronic thermostatic controls, electronic ignition, stainless steel side & rear splash, stainless steel exterior, EnerLogic™ Technology, 150,000 BTU (Garland), CSA, NSF
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.