Delfield N8656P Drop-In Hot & Cold Combination Pan – 56-1/4" (4-Pan)
Serve four full-size pans — hot or cold — from a single well.The N8656P is the ultimate space-saving solution for operators that need both hot holding and refrigerated service in one footprint. Flip the 3-way toggle switch to instantly change modes, keep food in the safe zone, and streamline your workflow from breakfast through dinner.
Key features at a glance
- 2-in-1 design: NSF-4 certified hot and NSF-7 certified cold operation
- Holds 4 full-size 12" × 20" pans (up to 6" deep)
- 8" deep single-tank well with stainless steel immersion heater (wet heat only)
- Self-contained GreenGenius™ refrigeration system with eco-friendly R290 refrigerant
- Remote control panel: three-way Hot / Cold / Off switch & thermostat for hot mode
- Electronic temperature control for cold mode (factory mounted next to compressor)
- Adjustable pan supports: flush mount for hot service or 2" recessed for cold
- 1" stainless steel drain with screen for fast end-of-day clean-up
- Pre-installed press-fit flange gasket for quick “drop-in” installation
- Stainless steel top & liner with galvanized steel exterior housing
- Includes stainless steel louver & adapter bars for 12" × 20" pans
- Backed by a 1-year parts & labor warranty
Built for busy commercial kitchens
- Flexibility without extra footprint – switch from chilled salads to steaming entrées in seconds.
- Energy smart – high-density polyurethane insulation and R290 refrigerant reduce operating costs.
- Operator safety – high-limit safety switch cuts power to the heater if temperatures rise excessively and illuminates a warning light on the control panel.
- Simple maintenance – top-access drain, removable louver, and hard-wearing stainless surfaces keep service time to a minimum.
- Code compliant – UL, cULus and NSF listings meet health-department requirements nationwide.
Technical specifications
| Model | N8656P |
|---|---|
| Pan capacity | 4 × 12" × 20" full-size pans (up to 6" deep) |
| Overall width | 56-1/4" (142.9 cm) |
| Overall depth | 26" (66 cm) |
| Required counter cut-out | 55-1/4" W × 25" D (140 × 64 cm) |
| Well depth | 8" (20.3 cm) |
| Compressor | 1/4 HP, self-contained |
| Refrigerant | R290 (hydrocarbon) |
| Electrical | 120-240 V / 60 Hz / 1-Ph, 21 A (hard-wired) |
| BTU load (cooling) | 913 |
| Shipping weight | 233 lb (106 kg) |
| Certifications | UL, cULus, NSF-4 & NSF-7 |
Easy installation
- Drop-in flange gasket arrives factory-installed – no silicone required.
- Includes stainless steel louver for ventilation under the counter.
- Galvanized compressor stand fits easily into cabinetry.
- Supplied with adaptor bars and drain screen – just add your pans.
All electrical connections must be made by a qualified electrician.
Warning: Heater is for wet operation only. Running the unit dry may damage the element and void the warranty.
Warranty
Delfield covers the N8656P with a 1-year parts & labor warranty for dependable, worry-free service.
$10,357.50
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Delfield N8656P drop-in 4-pan hot/cold food well: durable stainless top, 8" deep tank, remote temp control, R290 refrigeration, NSF/UL rated.
Manufacturer
Delfield
Certifications
NSF, UL
Height
25.75in
Width
56.25in
Depth
26.0in
Shipping Weight
233.0lbs
Pan Qty
4-pan
Cooling Style
mechanically cooled
Controls
single controls
Finish
stainless steel top & well, galvanized exterior
Type
hot/cold
Specifications
Drop-In Hot/Cold Food Well, 56-1/4", 4-pan size for 12" x 20" pans, 8" deep single tank with drain, remote control panel with single temperature control & three-way toggle switch, stainless steel top & well, galvanized steel exterior housing, self-contained refrigeration, R290 refrigerant, 1/4 HP, (55-1/4" x 25" cutout required), cUL, UL, NSF
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.