Crown (Middleby) SCDA-3 Pressure Steamers
Crown (Middleby) SCDA-3 Pressure Steamers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Crown (Middleby) SCDA-3 Pressure Steamers
Description
Crown Steam SCDA-3 “Do-All” Dual-Pressure Steamer
3-Compartment | 36" Cabinet Base | Steam-Coil BoilerBuilt for kitchens that demand speed, volume and versatility, the SCDA-3 from Crown Steam toggles effortlessly between pressureless and pressure cooking in its top compartment while delivering traditional pressure steaming below. Three independent 60-minute timers, rugged 304 stainless steel construction and a factory-installed water filtration package make this all-in-one steamer a workhorse you can count on service after service.
Key Features & Benefits
- Dual-mode top compartment – switch between pressureless or 6 psi pressure for maximum menu flexibility.
- High-output regenerative steam-coil boiler (9-11 psi operating) handles up to 200 lb/hr of incoming steam (25-45 psi supply).
- Three independent manual control sets with 60-minute timers, audible/visible cycle complete alerts, and automatic steam shut-off & condensate drain.
- Factory-installed automatic boiler blowdown extends boiler life and streamlines cleaning.
- CSD-1 code package & water filter system included—saves on extras and meets local code requirements from day one.
- Full 304 stainless steel interior & exterior, welded door shells, and wheel-and-screw door closure rated for heavy-duty use.
- Generous pan capacity – 12 – 24 full-size (1/1 GN) pans on universal slides.
- Mounted on a reinforced 36" cabinet base with 6" adjustable flanged legs for secure floor bolting.
- Low-amp (2 A/compartment) 115 VAC controls keep electrical installation simple; 220–240 VAC, 50 Hz option available.
- Certified safe & sanitary – cCSAus, NSF, ASME-coded & National Board registered.
Technical Specifications
| Model | SCDA-3 (Do-All Dual-Pressure Steamer) |
|---|---|
| Total compartments | 3 (Top: pressure/pressureless | 2 Lower: pressure) |
| Pan capacity | 12 – 24 full-size (1/1 GN) pans |
| Boiler type / operating pressure | Steam-coil, regenerative; 9–11 psi (62–76 kPa) |
| Incoming steam supply | 25–45 psi (170–310 kPa) via 3/4" FPT Pressure-reducing valve required above 50 psi. |
| Electrical (controls only) | 2 A per compartment, 115 VAC, 1-Ph, 60 Hz |
| Water connections | 3/8" O.D. cold water, 25–50 psi (170–345 kPa) |
| Drain connection | 2" IPS to open floor drain (gravity) |
| Exterior dimensions (W × D × H) | 36" × 41" × 68.75" (914 × 1041 × 1746 mm) |
| Legs / mounting | 6" (152 mm) stainless legs with adjustable flanged feet |
| Included items | Water treatment system, automatic boiler blowdown, CSD-1 package, universal pan supports |
| Certifications | cCSAus, NSF, ASME-code stamped, National Board registered |
| Warranty | 1-year parts & labor (see warranty statement for details) |
Popular Factory Options (extra cost)
- 220 or 240 VAC, 50 Hz control circuit (GBVS-1)
- Ball float steam trap (BFT)
- Single or double 68" rinse spray hose w/ bracket
- Stainless steel back panel or frame upgrades
- Sheet-pan supports, wire shelf racks & correctional packages
Designed and listed for commercial use only. Installation must conform to all applicable codes.
